508888

Kicker SXRC Manual

82
Zoom out
Zoom in
Previous page
1/88
Next page
82
SXRC Remote Control
Help
SXRC displays FAILED and MANUAL SW UPDATES
REQUIRED:
¬Autosearch function has failed due to a catastrophic failure,
loss of communication network, loss of power during software
update.
9Go back and double check your Communications Network
cables and make sure they are inserted properly and
‘snapped’ into place.
9If you have purchased different cables, double check that
they are Straight-Through Ethernet Network cables.
9If you have made your own cables double check them for
secure and proper termination.
9Check the pins (#1 and #8) in the SX Series
amplifiers to make sure they are not bent or damaged.
¬Perform a Manual Software Update for each amplifier
exhibiting problem.
Everything powers up and looks great, just no sound:
¬Is the
MUTE indicator blinking in the SXRC display?. Turn off
mute for all amplifiers.
¬Use the Pink Noise function to test system for audio output.
The pink noise function injects its signal directly into the
amplifier after the DSP processor. This helps to determine if the
problem is before the DSP and amplifier or after.
9If you have pink noise from all your speakers then check
your :
Gain Range settings.
Gain settings.
Crossover settings.
RCA cables and connections.
Head unit fader, balance and volume controls.
9If you don’t have pink noise from all your speakers then
check your :
Speakers.
Speaker cables and connections.
Amplifier power and speaker connections.
All of my amplifier’s volumes vary when I use the DRVC
(Remote Volume Control). I just want to control my bass!:
¬By default, all amplifiers connected to the SXRC are
controlled by the DRVC. Turn the
REMOTE VOL function off for
all amplifiers not connected to your subwoofers.
Select appropriate amp through
Amp Adj menu.
OR
Select appropriate group through
GROUP Adj menu.
THEN
Select
Remote Vol.
Select
Off.
Other problem, I am lost, I don’t know, Help!:
¬Contact your local Authorized KICKER Dealer where you
purchased your unit for assistance.
¬Contact KICKER Technical Services for assistance.
¬Ctrl+Alt+Del.
CAUTION: When jump starting the vehicle, be sure that
connections made with the jumper cables are correct.
Improper connections (+ to - & - to +) will result in blown
fuses as well as failure to other systems in the vehicle.
If you have questions about the installation and operation of
your new KICKER SXRC Remote Control, see the Authorized
KICKER Dealer in your area or contact KICKER Technical
Services directly at (405)624-8583.
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kicker SXRC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kicker SXRC in the language / languages: English as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info