The display will flash ASSIGNED to confirm the amplifier has
been added. Once an amplifier is added
to a group it is removed from the list of
available amplifiers.
Continue assigning the amplifiers you want
associated with this group by using the
UP or
DOWN keys to select the amp and the
ENT key to select it.
When you are done assigning amplifiers to
this group, press the
ESC key to return to
the ASSIGN menu’s group selection screen.
You can then select another group and assign
amplifiers to it.
NOTE:
While selecting amplifiers to assign to a group, If you use up all
the available amplifiers the display will
read
N/A letting you know there are no
more amplifiers available to assign.
64
SXRC Remote Control
Operation
ASSIGN MENU - Here you can select any of the 10 groups and
select which amplifiers belong to that group.
An amplifier can only belong to ONE group at any time...so
once you assign it to a group it can not be assigned to another
group unless you remove it from the group it is currently assigned
to. To remove an amplifier from a group you use the RELEASE
menu function.
Use the
UP or DOWN keys to select
which group you want to assign amplifiers to
and press the
ENT key to select it.
If the display shows
N/A then all amplifiers are currently
assigned to a group. You have to use the
RELEASE menu to free up the
amplifier(s) you are wanting to use.
If there are amps available to assign then use
the
UP or DOWN keys to scroll through the
list of available amplifiers.
If you have multiple amps of the same make
or name you can check its’ Remote Address
to help you identify which amp you are
currently viewing. Simply press and hold the
ENT key and the Remote Address of
the amplifier will be displayed.
Press
ENT to add the selected amplifier to
the current selected group.
