Manual Kicker sx 700 4 (page 16 of 20) (English)

167667

Zoom out

Zoom in

1/20

SX .4 Series Amplifiers

Operation

PRESET PRESETS

Ok, we know that sounds like a certain pizza commercial,

but seriously the four memory presets come with settings

already in them.

You can use these as a starting point to do your own

tweaking or for quick push-a-button-and-be-done setup.

Any preset you store will replace the ones that come from

the factory. You can reset all four preset back to factory

defaults anytime simply by doing a reset in the RESET AMP

menu.

Here are the settings in each preset from the factory.

In more general terms, each preset offers you these

options.

Memory-1 sets Amp 1 and Amp 2 into full-range mode with

a infrasonic filter (often called subsonic filter) to protect the

speakers from harmful ultra-low frequencies.

Memory-2 sets Amp 1 and Amp 2 into high-pass operation.

Used for powering up a set of coaxial or component speakers

when another amp is driving a subwoofer.

Memory-3 sets Amp 1 and Amp 2 into low-pass operation

with a infrasonic filter. For use when the amplifier is driving a

subwoofer.

Memory-4 sets the amplifier up for Bi-Amp duty. Amp 1 is

setup for use with coaxials or component speeakers. Amp 2 is

setup for subwoofer duty with an infrasonic filter.

As stated before you can always start with one of these

presets, tweak

it to fit your

installation and

then save your

settings into a

new preset.

MEMORY-1 MEMORY-2 MEMORY-3 MEMORY-4

Amp-1 Amp-2 Amp-1 Amp-2 Amp-1 Amp-2 Amp-1 Amp-2

GAIN LEVEL 6 DB

6 DB

EQ FREQUENCY 40 HZ

40 HZ

EQ BOOST/CUT FLAT

FLAT

EQ BANDWIDTH 3

LO-PASS SLOPE OFF

OFF

24 dB

OFF

24 DB

LO-PASS FREQ 20325 HZ

20325 HZ

84 HZ

20325 HZ

84 HZ

HI-PASS SLOPE 12 DB

12 DB

24 DB

HI-PASS FREQ 25 HZ

25 HZ

84 HZ

25 Hz

84 HZ

25 HZ

PHASE L&R CH. 0 DEGREE

0 DEGREE

O DEGREE

MUTE L&R CH. OFF

OFF

KOMPRESSOR OFF

OFF

KOMP ADJ. 0 DB 0 DB 0 DB 0 DB 0 DB 0 DB 0 DB 0 DB

SX .4 Series Amplifiers

Operation

Memory Presets

There are four memory preset keys each with an

indicator above it in the ISIS VFD display. The indicator will

illuminate if that

memory preset is

currently in use.

Each preset stores

all the values for

each of the

following amplifier

controls:

*.)

GAIN

*.) EQ

*.) LO-PASS

*.) HI-PASS

*.) PHASE

*.) MUTE

*.) KOMPRESSOR

This gives you the

ability to dial in four

completely different

amplifier settings and store them in presets for instant recall

later.

It’s like a preset for your favorite radio stations...only better!

M1 M2 M3 M4

ESC ENT

HOME

SYS

MEM-1

GAIN EQ LPF HPF KOMP

AMP1

LOCK

MEM-2 MEM-3 MEM-4

PHASE

MUTE

AMP2

LEFT RIGHT

** kicker

INDICATORS

PRESETS

STORING A PRESET

Make all the adjustments you want to have stored in the

preset and return to the DEFAULT screen.

To store your settings into a preset

simply press and hold the desired

memory key until the VFD display flashes

STORED . Then release the memory key.

The indicator which matches the preset

you used will illuminate.

RECALLING A PRESET

To recall a memory preset simply press

and release the key. The matching

indicator will light up and the amplifier will

change all the corresponding controls to

the values assigned to the memory pre-

set.

M2 M3

SYS

MEM-1

GAIN EQ LPF HPF KOMP

AMP1

LOCK

MEM-2 MEM-3 MEM-4

PHASE

MUTE

AMP2

LEFT RIGHT

stored

SYS

MEM-1

GAIN EQ LPF HPF KOMP

AMP1

LOCK

MEM-2 MEM-3 MEM-4

PHASE

MUTE

AMP2

LEFT RIGHT

** kicker

M2 M3

HOLD

PRESS &

RELEASE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kicker sx 700 4 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kicker sx 700 4 Manual

Product: