Manual Kicker sx 400 2 (page 12 of 20) (English)

166265

Zoom out

Zoom in

1/20

SX .2 Series Amplifiers

Operation

hi-pass MENU - Here is where you adjust the high pass

crossover.

Press the

ENT key to enter the

HI-PASS menu.

Use the

UP and DOWN keys to

scroll through

frequency and slope

and press the ENT to select the one

you want to adjust.

FREQUENCY selects the crossover point and can be set at any

1/12th octave frequency from 10 Hz to 16 kHz.

(

10 Hz to 16132 Hz)

Use the

UP and DOWN keys to

select your frequency. Press the

ESC

key to return to the HI-PASS menu.

SLOPE selects the rolloff of the crossover and can be set

from

OFF to 36 dB in 6 dB steps.

Use the

UP and DOWN keys to

select your slope. Press the

ESC

to return to the HI-PASS menu.

When you are done adjusting the

EQ press the

ESC key while in the

EQ menu to return to the MAIN

menu.

NOTE...

While adjusting the HI-PASS crossover you will notice the

hpf indicator on the ISIS VFD display is lit. This indicates

you are in the HI-PASS crossover menu.

The KICKER SX amplifier monitors and prevents any high

pass crossover point from being any closer than 1/3 octave

from the low pass crossover point. If you cannot set the high

pass crossover where you want then check the

LPF indicator

and see if it is flashing. If it is then you need to go to the

LO-PASS menu and lower the low pass crossover point.

This is done as a safety precaution to prevent a notch

filter condition.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

SX .2 Series Amplifiers

Operation

Lo-Pass MENU - Here is where you adjust the low pass

crossover.

Press the

ENT key to enter the

LO-PASS menu.

Use the

UP and DOWN keys to

scroll through

frequency and

slop[e. Press the ENT to select the

one you want to adjust.

FREQUENCY selects the crossover point and can be set at any

1/12th octave frequency from 30 Hz to 20 kHz.

(

30 Hz to 20325 Hz)

Use the

UP and DOWN keys to

select your frequency. Press the

ESC to return to the LO-PASS

menu.

SLOPE selects the rolloff of the crossover and can be set

from

oFF to 36 dB in 6 dB steps.

Use the

UP and DOWN keys to

select your slope. Press the

ESC to

return to the LO-PASS menu.

When you are done adjusting the

EQ press the

ESC key while in the

EQ menu to return to the MAIN

menu.

NOTE...

While adjusting the LO-PASS crossover you will notice the

LPF indicator on the ISIS VFD display is lit. This indicates

you are in the LO-PASS crossover menu.

The KICKER SX amplifier monitors and prevents any low pass

crossover point from being any closer than 1/3 octave from

the high pass crossover point. If you cannot set the low pass

crossover where you want then check the

HPF indicator and

see if it is flashing. If it is then you need to go to the HI-PASS

menu and raise the high pass crossover point.

This is done as a safety precaution to prevent a notch filter

condition.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kicker sx 400 2 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kicker sx 400 2 Manual

Product: