166264

Kicker sx 1250 1 Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
11
SX .1 Series Amplifiers
Installation
AMPLIFIER STRAPPING
SX.1 series amplifiers are capable of being strapped
together to provide twice the power into twice their rated
minimum impedance. Only like model amps can be strapped
together. In other words, the SX650.1 can only be strapped to
another SX650.1 and the SX1250.1 can only be strapped to
another SX1250.1.
NOTE...
4 ohm minimum impedance for SX650.1 when strapped.
2 ohm minimum impedance for SX1250.1 when strapped.
1.) Wire both amplifiers to 12 volt power, ground and
remote.
2.) Connect a RCA cable from the source unit to the RCA
Input jacks on the primary amp.
3.) Use the supplied 1/8 inch mono cable to connect the
Amp Strapping Out jack of the primary amplifier to the
Amp Strapping In jack of the secondary amplifier.
4.) Use a short piece of heavy gauge wire (12Ga, 10Ga, 8Ga)
to connect the Speaker negative terminals of both amps
together.
5.) The primary amplifier’s positive terminal is used for the
positive speaker connections.
6.) The secondary amplifier’s positive terminal is used for the
negative speaker connections.
AMP STRAPPING
AMP STRAPPING
SOURCE UNIT
+
_
10
SX .1 Series Amplifiers
Installation
MULTIPLE SPEAKERS OR VOICE COILS SERIES WIRED
SX.1 series amplifiers are capable of powering multiple speakers or voice coils wired in
series as long as the minimum impedance does not drop below 2 ohms (SX650.1) or 1 ohm
(SX1250.1).
GROUND
REMOTE
TURN-ON
BATTERY
+12V
FUSE
18"
or less
S+
S-
ESC
HOME
ENT
M1
AMP 1
LOCK LEFT SYS RIGHT MUTE
AMP 2
GAINEQ LPF HPF PHASEKOMP
8888888888.........
M2 M3
M4
SIGNAL OUT
SIGNAL IN
+
_
+
_
+
_
These are just a few of the many ways you can use your SX.1 series Kicker amplifier.
These system diagrams are designed to give you a basic understanding of the most com-
mon uses for this amplifier. For more complex systems please visit your local authorized
Kicker dealer. You can also download the SX Technical Manual from our website at
www.kicker.com for more detailed information and complex system diagrams.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kicker sx 1250 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kicker sx 1250 1 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info