166253

Kicker kx 100 2 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
7
KX Amplifier
Navigation
Your Kicker amplifier has two rotary controls and one switch on
the end panel. These controls ensure the reliability and
performance of the amplifier, so they need to be set correctly.
CROSSOVER SWITCH
NEVER CHANGE THE CROSSOVER “OFF/HI/LOW” SWITCH
SETTING WITH THE AUDIO SYSTEM ON!
The crossover switch located on the end panel next to the
RCA jacks is for setting the internal crossover. In the OFF posi-
tion the amplifier passes a full-range signal to the speakers. Use
the LO position when connected to a subwoofer.
The HI position should be selected when connected to
speakers, which you do not want to receive any sub-bass
information..
Selectable
Crossover Switch
Set @ 80Hz
Bass Boost
0-12 dB@ 40Hz
Input
Low Level & High Level
170mV- 5V 340mV- 10V
Input Gain
BEFORE TURNING ON THE SYSTEM FOR THE FIRST TIME,
MAKE SURE THAT THE TWO ROTARY CONTROLS ON THE
SIDE OF THE AMPLIFIER ARE TURNED FULLY
COUNTER-CLOCKWISE!
GAIN CONTROL
Remember, the input gain control is not a volume control, it
matches the output of the head unit to the input level of the
amplifier and must be adjusted properly for best performance. All
the way up or down is not necessarily the best. Turn the head
unit up to about 3/4 volume (if the head unit goes to 30, turn it to
23). Next, turn (clockwise) the gain on the amplifier up slowly
until you can hear audible distortion, then turn it down just a little.
Crossover Control
The crossover is fixed with a 12dB slope at 80Hz high pass or
low pass. This control should be set to match your speaker
requirements. For example, if the amplifier is driving subwoofers,
you will need to set it to low pass.
KickBass (Bass Boost Control)
The KickBass bass boost control is designed to give you
increased output 0 - 12dB at 40 Hz. The setting for this control is
subjective, however, if you turn it up, you must go back and
adjust the gain control to avoid clipping the amplifier.
Operation
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kicker kx 100 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kicker kx 100 2 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kicker kx 100 2

Kicker kx 100 2 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info