813922
17
Zoom out
Zoom in
Previous page
1/24
Next page
Installation and operation manual“
17
6 Troubleshooting
PROBLEM
REASON
SOLUTION
I. Poor control of fire in
the furnace.
1. Excessive quantity of combustion
air.
1. Reduce the quantity of
combustion air using the adjustment
lever in the fireplace insert.
2. Open chimney damper.
2. Close the chimney damper.
3. Excessive quantity of inserted
fuel.
3. Do not put more fuel and reduce
the quantity of combustion air, close
the chimney damper.
4. Worn gaskets.
4. Fit new gaskets.
5. Excessive negative pressure in
the chimney.
5. Install a cap type chimney
attachment and/or install a draught
moderator.
II. Fire cannot be lit up
in the furnace
1. Closed levers of combustion air
inlet.
1. Increase the quantity of
combustion air.
2. Clogged openings of air blow-in
in the furnace.
2. Clean furnace interior from ash.
3. Insufficient negative pressure in
the chimney.
3. Check if the inspection door is
closed; clean the chimney and
connecting duct; recommended
installation of a mechanical
combustion gas exhaust.
4. Too humid wood.
4. Replace the wood with dry wood
(humidity under 20%)
5. Too large slivers used for lighting
up.
5. Use smaller slivers.
6. Bad weather conditions.
6. Check if burning improves once
the weather is better. In case of
recurring problems resulting from
weather conditions, installation of a
mechanical combustion gas
exhaust is recommended.
III. Smoke comes out
from the fireplace insert
1. The chimney and/or connecting
pipe is not passable.
1. Cleaning of the chimney and
connecting pipe is necessary.
2. The chimney and/or connecting
pipe is not tight.
2. Check tightness of closing the
inspection door in the chimney and
connection of the connecting pipe.
3. Excessive negative pressure in
the room in which the fireplace is
installed.
3. Supply fresh air to the room in
which the fireplace is installed (e.g.
open the window).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KFD STO MAX 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KFD STO MAX 7 in the language / languages: English as an attachment in your email.

The manual is 1.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info