562627
12
Zoom out
Zoom in
Previous page
1/15
Next page
Step 1
Once brewing is complete, lift the Brewer Handle and
carefully remove the Vue
pack by holding the outer rim.
The Vue
pack will be HOT after brewing. Use
caution when removing. Allow it to cool completely
before handling.
SECTION 6
Recycling Vue
Pack’s Plastic Cup
SECTION 7
Troubleshooting
SOLUTION
Make sure that the Power Button has been turned on and
Touchscreen is illuminated.
Plug Brewer into an independent outlet.
Check to be sure that it is plugged in securely.
Plug into a different outlet.
Reset the circuit breaker if necessary.
After placing the Vue
pack in the Vue
pack Holder, make
sure the Handle is pushed down securely and the Touchscreen
displays the beverage options. Push the flashing “BREW
Button.
If the Touchscreen indicates “Please Add Water,” add water
to the Water Reservoir and make sure the Water Reservoir is
seated properly in its base.
If the Touchscreen indicates “Please Add Water” even after
refilling, contact Customer Service at 1.866.901.BREW (2739).
The Brew Head may need to be cleaned or the Brewer may need
to be de-scaled (refer to pages 20 and 21).
Clean the Brew Head if necessary (refer to page 20).
The Water Reservoir may have been removed during brewing.
Replace the Water Reservoir and perform cleansing brews
(refer to page 15) without a Vue
pack.
De-scale the Brewer (refer to page 21).
If you have repeated the de-scale procedure on your Brewer
two times and it is still only brewing a partial cup, contact
Customer Service at 1.866.901.BREW (2739).
Check to make sure that the “On/Off Time” and/or “Auto Off
settings have not been set. Please refer to pages 17 and 18 for
instructions.
The water level is low and a full cup cannot be brewed.
Add water to Water Reservoir.
If the water level is not low, remove the Water Reservoir and
empty the water. Then thoroughly clean (refer to page 20). Fill
the Water Reservoir to the “MAX FILLline and then return it to
the Brewer and ensure it is seated properly in its base. Wait for
the Water Reservoir light to stop flashing.
If power is interrupted to the Brewer by unplugging it, or if
power is lost, follow the procedure on page 17 to set the clock.
SITUATION
Brewer does not
have power
Brewer will
not brew
Brewer brews only
a partial cup
Brewer shuts
off or turns on
automatically
Water Reservoir
light is flashing and
the Touchscreen
indicates “Add Water
The Time is not displayed
on the Touchscreen
Recycle your Vue
pack’s plastic cup wherever #5
plastic is accepted. #5 plastic may not be recyclable in
your community today, so please check locally with
your municipality or waste hauler, or visit
www.vuerecycling.com for more information about
recycling your Vue
pack’s plastic cup.
Simply follow these simple steps:
Step 3
Once separated, discard the lid and the attached filter.
Recycle your Vue
pack’s plastic cup wherever #5
plastic is accepted.
Step 2
Once cool, separate the lid and filter from the cup.
The filter will adhere to the lid.
23
22
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keurig Vue V 1255 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keurig Vue V 1255 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info