562626

Keurig Rivo Cappuccino Latte System Manual

5
Zoom out
Zoom in
Previous page
1/11
Next page
PREPARING YOUR SYSTEM
1 Min
Prepare the Water Reservoir
STEP 1: Remove all packing materials from the Keurig
®
Rivo
™
System and Frothing Pitcher. Place the System on
a flat, stable surface away from water and heat sources.
Remove all adhesive tape and labels.
STEP 2: Lift and remove the Water Reservoir Lid, then
remove the Water Reservoir by lifting up and away from
the Rivo
™
System.
STEP 3: Rinse the Water Reservoir and fill with water.
We recommend bottled or filtered water.
Hot water or any other liquid may damage the Water
Reservoir. Always ensure the Water Reservoir is filled to
the REFILL line before turning on the Rivo
™
System.
Prepare the Brewing System*
STEP 1: Place a 12 oz. mug on the Drip Tray. Plug the Power
Cord into a grounded outlet and press the Power Button on
the right side of the System.
STEP 2: After about 1 minute, the Control Panel will flash
and you will hear a beep. This indicates the Rivo
™
System
is ready. Press the Espresso Lungo Button to run the first
cleansing brew. When brew is complete, discard the hot
water from the mug.
Prepare the Frothing System*
STEP 1: Remove packing material and static cling from
Frothing Pitcher and fill to MIN FILL with water. Secure
the Lid and place the Frothing Pitcher into the System.
STEP 2: Press the Latte Froth Button to run the first
cleansing froth. You will hear a beep when the cycle
is complete.
STEP 3: Remove the Frothing Pitcher from the System
and carefully remove the Lid. Discard the water and dry
all components.
*The first cleansing brew and cleansing froth cycles prepare the
System for your first beverage. It is normal for the System to be
slightly louder during these initial cycles.
*After brewing, the Rivo
™
System will automatically prepare
for your next brew. As a safety feature, your System will
automatically shut off at any stage when it is idle for longer
than 2 minutes. Press the Power Button to restart.
You are now ready to craft your
first beverage!
1 Min
8 9
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keurig Rivo Cappuccino Latte System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keurig Rivo Cappuccino Latte System in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info