649108
11
Zoom out
Zoom in
Previous page
1/44
Next page
11
the profile height. You reach the next bar via the MODE key;
then UP or DOWN again for height, etc. Program all 16 bars.
Training start by pressing the START key and active training.
If you have designed your individual route profile, you can
additionally set the default values. To this end, press the START
STOP key. All default values can be set individually [TIME,
DISTANCE, CALORIES or PULSE]. At least one default value must
be selected. After completing the setting of the default values,
you can start your training by pressing the START key and start
your active training.
The entire route profile can be increased or reduced via the UP
and DOWN keys either prior to the start of or during the
training.
By means of the set training period (TIME), the computer counts
the training progress in the route profile (bar graph) from left to
right with a blinking bar. If the pre-set value [TIME, DISTANCE,
CALORIES or PULSE] is reached, an acoustic signal will sound
for 8 seconds. The training data is not counted further. You have
reached your training target! By pressing the START key, it is
also possible to continue your training.
Training > TARGET H.R.
Training via target heart rate (THR)
In this training mode, the route profile is automatically adjusted
to the setting values (age and THR) as well as the measured heart
rate.
If you have selected the training mode TARGET H.R. via the keys
RESET, UP / DOWN and MODE , a number appears in the large
display. This number and the designation AGE will be blinking.
Enter your age using the keys UP or DOWN and confirm it via
MODE. Finally, the value 55% will appear in the large display.
You can either select 55, 75 or 90% and/or enter your individual
setting of the target heart rate.
The percentage defaults 55%, 75% and 90% refer to the
maximum pulse rate (220 - age) and pre-determine 3 general
training intensities for the fitness training.
55% of the max. heart rate (220 - age) corresponds to the
starting phase of the general fat burning trainings. This
default can then also be increased manually to 65%.
75% of the max. heart rate (220 - age) corresponds to the
phase for a general fitness training.
90% of the max. heart rate (220 - age) is only suited for shorter
sub-maximum exertion intervals for performance increase in
interval training.
After selecting your THR value, confirm it via MODE. You then
reach the default setting.
In this training mode it is not possible to set a PULSE value. All
other default values can be set freely. [TIME, DISTANCE or
CALORIES]
Training start by pressing the START key and active training.
The computer compares your currently measured heart rate
with the pre-set target value and accordingly adapts the
braking level during your training.
If the current heart rate is lower than the target value, the
braking level will be increased by one step every 30 seconds,
until the maximum value of the resistance or the set heart rate
is reached.
If the current heart rate is above the target value, the braking
level is automatically reduced. It will be reduced by one step
every 15 seconds until the set heart rate is reached.
If the braking level has been reduced to 1, but the value for
the heart rate still exceeds the target value for 1 minute, the
computer will stop and an acoustic alarm signal will sound
as a warning.
Over the set training period [TIME] the computer counts the
training progress in the route profile (bar graph) from left to
right with a blinking bar.
If the pre-set value [TIME, DISTANCE or CALORIES] is
reached, an acoustic signal will sound for 8 seconds. The
training data is not counted further. You have reached your
training target! By pressing the START key, it is also possible
to continue your training.
Functions and Operation of the Training Computer
GB
11


Need help? Post your question in this forum.

Forumrules
1

Forum

kettler-verso-309----07646-900

Reset search

  • the crostrainer doesn't incline even when i press UP thereby usually lifting the inclining/uphill bar, making it harder to cronstrain, any idea what the problem could be please? Submitted on 14-9-2023 at 10:37

    Reply Report abuse
  • I have a Kettler verso 309 and I can push the Up-butto and it works. But when I push the Down-button, the resistance is not going down. I have to push Stop and start the machine again to Begin St the lowest resistance. What is wrong? Submitted on 27-3-2020 at 22:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler VERSO 309 - 07646-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler VERSO 309 - 07646-900 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler VERSO 309 - 07646-900

Kettler VERSO 309 - 07646-900 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info