772982
69
Zoom out
Zoom in
Previous page
1/82
Next page
MY20K10-02_1.0_10.11.2020 69
Troubleshooting, fault clearance and repair
9.1.6 Lighting does not work
9.1.7 Other errors
9.2 Repair
Special knowledge and tools are required for
many repairs. That is why only a specialist dealer
may perform repairs such as:
Replacing tyres and rims
Replacing brake pads and brake linings
Replacing and tensioning the chain.
9.2.1 Original parts and lubricants
The individual S pedelec parts have been
carefully selected and matched to one other.
Only original parts and lubricants must be used for
maintenance and repair.
The constantly updated accessory approval and
parts lists are in Section 11 Documents and
Drawings.
Observe the operating instructions for the new
components.
9.2.2 Replacing the lighting
Only use components of the respective power
class for replacement.
9.2.3 Adjusting the headlight
The headlight must be set, so that its light beam
shines on the road 10 m in front of the
S pedelec.
Symptom Cause Remedy
The front light or rear light
does not go on, even
when the switch is
pressed.
The basic settings in the electric drive
system have probably been configured
incorrectly. The light is defective.
1Take the S pedelec out of service immediately.
2Contact your specialist dealer.
Table 23: Error solution for battery
Symptom Cause Remedy
Two beeps will sound if a
switch is pressed but the
switch cannot be
operated.
Pressed switch mode has been
deactivated.
This is not a malfunction.
Three beeps are
sounded. A fault or warning has occurred.
This occurs when a warning or an error is shown on the
display screen. Follow the instructions for the code indicated
on screen in Section 6.2 System Messages.
When you use an
electronic gear shift, you
can feel that pedal
assistance becomes
weaker when the gear is
changed.
This is because the computer sets the
pedal assistance to the optimum level.
This is not a malfunction.
A noise can be heard
after switching.
Contact your specialist dealer.
It is normal to hear a
noise coming from the
rear wheel when cycling
as normal.
The gear shift setting may not have
been made properly.
Contact your specialist dealer.
If you stop the S pedelec,
gear transmission does
not switch to the position
pre-configured in the
functional feature.
You may have applied too much
pressure onto the pedals.
It is easier to change gears if you press onto the pedals gently.
Table 24: Error solution for battery
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Velossi 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Velossi 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Velossi 2.0

Kettler Velossi 2.0 User Manual - German - 83 pages

Kettler Velossi 2.0 User Manual - Dutch - 82 pages

Kettler Velossi 2.0 User Manual - French - 84 pages

Kettler Velossi 2.0 User Manual - Spanish - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info