Manual Kettler Vector - 07708-100 (page 4 of 32) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

736680

Zoom out

Zoom in

1/32

Please read these instructions carefully prior to carrying out assembly and using for the ﬁrst time. They contain infor-

mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-

structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.

For Your Safety

RISK! While assembly of the product keep off children’s reach

(Choking hazard - contains small parts).

RISK! Any other use of the equipment is prohibited and may

be dangerous. The manufacturer cannot be held liable for da-

mage or injury caused by improper use of the equipment.

RISK! Instruct persons using the equipment (in particular chil-

dren) on possible sources of danger during exercising. Only for

appliances with weights or dumbbells. This especially applies

to the area of movement of weights and dumbbells.

RISK! Incorrect repairs and structural modiﬁcations (e.g. re-

moval or replacement of original parts) may endanger the

safety of the user.

WARNING! The training device should be used only for its in-

tended purpose, i.e. for physical exercise by adult people.

WARNING! Before beginning your program of training, study

the instructions for training carefully.

WARNING! Any interference with parts of the product that

are not described within the manual may cause damage, or en-

danger the person using this machine. Extensive repairs must

only be carried out by KETTLER service staff or qualiﬁed per-

sonnel trained by KETTLER.

■ The training device has been designed in accordance with the

latest standards of safety. Any features which may have been

a possible cause of injury have been avoided or made as safe

as possible.

■ The training device corresponds with DIN EN 957 -1/-2, class

HB. It is therefore unsuitable for therapeutic use.

■ In case of enquiry, please contact your KETTLER dealer.

■ If the equipment is in regular use, check all its components tho-

roughly every 1–2 months. Pay particular attention to the tight-

ness of bolts and nuts.

■ Before beginning your program of exercise, consult your doc-

tor to ensure that you are ﬁt enough to use the equipment. Base

your program of exercise on the advice given by your doctor.

Incorrect or excessive exercise may damage your health!

■ Before use, always check all screws and plug-in connections as

well as respective safety devices ﬁt correctly.

■ Always wear suitable shoes when using.

■ Our products are subject to a constant innovative quality as-

surance. We reserve the right to perform technical modiﬁcati-

ons.

■ In choosing the location of the apparatus, ensure a sufﬁcient

safety distance from any obstacles. The apparatus must not be

mounted in the immediate vicinity of main passageways (paths,

doorways, corridors).

■ Always observe the general safety rules and precautions for

working with electrical equipment.

■ Nobody may be in the moving range of a training person du-

ring training

■ This exercise machine may only be used for exercises indica-

ted in the training instructions.

■ The surface on which the unit is placed must be ﬁrm and even.

Place rubber or straw mats under it to deaden any noise or im-

pacts. Only for appliances with weights. Avoid powerful os-

cillations of the dumbbells!

■ When mounting the product please take the recommended tor-

que information into account (M = xx Nm).

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around. Al-

ways dispose packaging material in such a way that it may

not cause any danger. There is always a risk of suffocation if

children play with plastic bags!

WARNING! Please note that there is always a danger of injury

when working with tools or doing manual work. Therefore

please be careful when assembling this machine.

■ Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the dia-

grams. The correct sequence is given in capital letters.

■ The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-

sible technically talented.

■ The fastening material required for each assembly step is

shown in the diagram inset. Use the fastening material exactly

as instructed.

■ Bolt all the parts together loosely at ﬁrst, and check that they

have been assembled correctly. Tighten the locknuts by hand

until resistance is felt, then use spanner to ﬁnally tighten nuts

completely against resistance (locking device). Then check that

all screw connections have been tightened ﬁrmly. Attention:

once locknuts have been unscrewed they no longer function

correctly (the locking device is destroyed), and must be repla-

ced.

■ For technical reasons, we reserve the right to carry out preli-

minary assembly work (e.g. addition of tubing plugs).

■ For machines with rope systems: please ensure that all ropes

are ﬁxed correctly. This is especially important for latissimus

bars.

Important Instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Vector - 07708-100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 14,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Vector - 07708-100

Kettler Vector - 07708-100 User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Vector - 07708-100 Manual

Product: