Manual Kettler UNIX 10 - 07692-500 (page 4 of 60) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

663007

Zoom out

Zoom in

1/60

Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-

mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-

structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.

For Your Safety

RISK! While assembly of the product keep off children’s reach

(Choking hazard - contains small parts).

RISK! The device requires a supply voltage of 230V, 50 Hz. –

Connect the power cord with a grounded protective contact

socket.

RISK! Any other use of the equipment is prohibited and may be

dangerous. The manufacturer cannot be held liable for damage

or injury caused by improper use of the equipment.

RISK! Instruct people using the equipment (in particular child-

ren) on possible sources of danger during exercising.

RISK! Do not under any circumstances carry out electrical re-

pairs or alterations yourself. Always ensure that such work is

done by a properly qualified electrician.

RISK! disconnect the apparatus from the mains before doing re-

pair, maintenance or cleaning work.

RISK! Incorrect repairs and structural modifications (e.g. re-

moval or replacement of original parts) may endanger the sa-

fety of the user.

RISK! Heart rate monitoring systems may be inaccurate. Over

exercise may result in serious injury or death. If you feel faint

stop exercising immediately.

RISK! All electric appliances emit electromagnetic radiation

when in operation. Please do not leave especially radiation-in-

tensive appliances (e.g. mobile telephones) directly next to the

cockpit or the electronic controlsystem as otherwise values dis-

played might be distorted (e.g. pulse measurement.

RISK! Ensure that the power cable is not pinched and that no-

one can trip over it.

WARNING! The training device should be used only for its in-

tended purpose, i.e. for physical exercise by adult people.

WARNING! Before beginning your program of training, study

the instructions for training carefully.

WARNING! Any interference with parts of the product that are

not described within the manual may cause damage, or en-

danger the person using this machine. Extensive repairs must

only be carried out by KETTLER service staff or qualified per-

sonnel trained by KETTLER.

WARNING! This training device is for home use only.

■ The training device has been designed in accordance with the

latest standards of safety. Any features which may have been

a possible cause of injury have been avoided or made as safe

as possible.

■ In case of enquiry, please contact your KETTLER dealer.

■ If the equipment is in regular use, check all its components

thoroughly every 1–2 months. Pay particular attention to the

tightness of bolts and nuts. This is particularly true for the attach-

ment of grip strap, running plate and fastening of the handlebar

and front tube.

■ Before beginning your program of exercise, consult your doc-

tor to ensure that you are fit enough to use the equipment. Base

your program of exercise on the advice given by your doctor.

Incorrect or excessive exercise may damage your health!

■ Before use, always check all screws and plug-in connections as

well as respective safety devices fit correctly.

■ Always wear suitable shoes when using.

■ Our products are subject to a constant innovative quality assu-

rance. We reserve the right to perform technical modifications.

■ The location for the device must be selected such that a sufficient

and safe distance from any obstacles is maintained. In the im-

mediate vicinity of the main operational directions, nothing else

should be placed. There should be at least one meter of free

space surrounding the exercise space.

Make sure that no one, other than the person who is training,

is in the device space when the device is in motion.

■ Always observe the general safety rules and precautions for

working with electrical equipment.

■ Do not use a multiple power socket for the running belt. If an ex-

tension cable is being used, ensure that it complies with the

VDE regulations.

■ Unplug the power cord of the device from the socket if not used

for a longer period.

■ Nobody may be in the moving range of a training person du-

ring training

■ This exercise machine may only be used for exercises indicated

in the training instructions.

■ This training device has to be set up on a horizontal surface

under all circumstances. Place rubber or straw mats under it to

deaden any noise or impacts. Only for appliances with weights.

Avoid powerful oscillations of the dumbbells!

■ When mounting the product please take the recommended tor-

que information into account ( = xx Nm).

07692-200 UNIX 2 / 07692-400 UNIX 4

■ The training device corresponds with DIN EN ISO 20957-

1/DIN EN 957-9, class HB. It is therefore unsuitable for thera-

peutic use.

07692-500 UNIX 10

■ The training device corresponds with DIN EN ISO 20957-

1/DIN EN 957-9, class HA. It is therefore suitable for thera-

peutic use.

07692-400 UNIX 4 / 07692-500 UNIX 10

WARNING! If you lose the pulse signal, the performance of

the device will remain constant for approx. 60 seconds and is

then slowly adjusted downwards. Please check your pulse mea-

suring system (ear clip, hand pulse or chest belt) so that the

pulse signal of the electronics can be entered again.

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around. Al-

ways dispose packaging material in such a way that it may not

cause any danger. There is always a risk of suffocation if child-

ren play with plastic bags!

– EN – Important Instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler UNIX 10 - 07692-500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 19,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler UNIX 10 - 07692-500

Kettler UNIX 10 - 07692-500 User Manual - English, German, Dutch, French, Italian, Spanish - 122 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler UNIX 10 - 07692-500 Manual

Product: