773015
96
Zoom out
Zoom in
Previous page
1/125
Next page
MY20K01-12_1.0_12.06.2019 96
Cleaning and servicing
Check tyre wear.
Check the tyre pressure.
Check the rims for wear.
The rims of a rim brake with invisible wear
indicator are worn as soon as the wear indicator
becomes visible in the area of the rim joint.
The rims with visible wear indicator are worn as
soon as the black, all-round groove on the pad
friction surface is no longer visible. We
recommend that you also replace the rims with
every second brake lining replacement.
Check the tension of the spokes.
7.4.2 Checking the tyres
Check the tyre wear. The tyre is worn if the
anti-puncture protection or the carcass cords
are visible.
A specialist dealer will need to change the tyre
if it is worn.
7.4.3 Checking the rims
Check the rims for wear. The rims are worn as
soon as the black, all-round groove on the pad
friction surface becomes invisible.
Worn rims must be replaced by a specialist
dealer.
We recommend that you also replace the rims
at the same time as every second brake lining
replacement.
7.4.4 Check and correct tyre pressure
7.4.4.1 Dunlop valve
The tyre pressure cannot be
measured on the simple
Dunlop valve. The tyre
pressure is therefore measured
in the filling hose when
pumping slowly with the bicycle
pump.
It is recommendable to use a
bicycle pump with a pressure
gauge. The operating
instructions for the bicycle
pump must be adhered to.
Unscrew and remove the
valve cap.
Connect the bicycle pump.
Pump up the tyre slowly and
pay attention to the tyre pressure in the
process.
Correct the tyre pressure according to
specifications in the Pedelec pass.
If the tyre pressure is too high, unfasten the
union nut, let out air and tighten the union nut
again.
Remove the bicycle pump.
Screw the valve cap tight.
Screw the rim nut gently against the rim with
the tips of your fingers.
7.4.4.2 Presta valve
It is recommendable to use a
bicycle pump with a pressure
gauge. The operating
instructions for the bicycle pump
must be adhered to.
Unscrew and remove the
valve cap.
Open the knurled nut around
four turns.
Carefully apply the bicycle
pump so that the valve insert is
not bent.
Notice
If the tyre pressure is too low in the tyre, the tyre
does not achieve its load bearing capacity. The
tyre is not stable and may come off the rim.
If the tyre pressure is too high, the tyre may burst.
Check the tyre pressure as per specifications
Adjust the tyre pressure as necessary.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Traveller - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Traveller - 2020 in the language / languages: English as an attachment in your email.

The manual is 18.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Traveller - 2020

Kettler Traveller - 2020 User Manual - German - 125 pages

Kettler Traveller - 2020 User Manual - Dutch - 128 pages

Kettler Traveller - 2020 User Manual - French - 131 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info