736076

Kettler Track 5 - 07885-400 Manual

20
Zoom out
Zoom in
Previous page
1/144
Next page
20
GB
U
SB
The USB port is at the back of the console. Using this port it is pos-
sible to exchange data with a PC by means of KETTLER Software
(WORLD TOURS 1.0 Art.-No. 07926-800).
OPERATION
SWITCH ON
First switch on the device. The ON/OFF button for the treadmill is
located next to the power supply cable on the front, underneath
the motor cover. Move the switch in the ON-Position.
SAFETY KEY
Check the function of the safety key prior to every training. Attach
t
he safety key to the safety switch and the string to your clothes. If
the safety key is not inserted in the safety switch the symbol of the
safety switch will be shown in the display.
START OF TRAINING
For stepping on and off the treadmill always hold tight to the hand
rails.
Prior to the commencement of the training step on the side plat-
forms of the treadmill. Never start the device when standing on the
belt. Start your training with a low speed and later increase the
speed and the incline angle. Try to always run as centred as pos-
sible on the belt.
During the training your head and your body shall always point to
the front. Never try to turn on the treadmill, while the belt is still
moving.
TRAINING PROGRAMS
Manual Program
After switching on the device and inserting the safety key, press
the START button. The treadmill will be started after 3 seconds with
a speed of 0.8km/h (0.5mph).
You can increase / decrease the speed or the incline at any time
during the training. To stop the training, simply press the STOP but-
ton.
When manually starting the training the display of the training di-
stance and training time will increase. The manual program is a
training without temporal limit. The training program cannot be
saved at the end of the workout.
1. Switch on the device.
2. Attach the safety key to the treadmill and the clip to the clothes
of the user.
3. Press the START button to start the training.
PROGRAM SELECTION
The user has the choice to select between two different programs.
The following programs are available:
P1 : Incline Program with 6 different profiles
P2 : Speed Program: with 6 different profiles
P3 : Calorie Program
P4 : Distance Program
P5 : : HRC ascent programme: with 2 different profiles
P6 : HRC speed programme: with 2 different profiles
P7 : User Programme – 4 individual profiles
P8 : RACE Programme: Competition with 4 saved programmes
(User Programme)
After the selection of the program the user can add some details.
The predefined value is blinking and indicates that this value could
be confirmed or changed. As soon as you entered and confirmed
your values you can start with the training on the treadmill.
P
1 : INCLINE PROGRAM WITH 6 DIFFERENT PROFILES
I
n the “P1: Incline Program” you can choose between 6 preset pro-
files. You can increase / decrease the speed or the incline at any
time during the training. The time setting in the display will decrease
and the distance covered will increase.
1. Switch on the device.
2. Attach the safety key to the treadmill and the clip to the clothes
of the user.
3. Select the “P1 : Incline Program” with the cursor buttons and
confirm with Enter
4. Confirm (Enter) or change (Cursors buttons) the time input
5. Select a profile (cursor buttons) and confirm with Enter
6. Confirm (Enter) or change (Cursors buttons) the maximum in-
cline
7. Confirm with Enter to begin the training.
8. The training can be interrupted at any time by pressing the
STOP button. A restart of the training is possible during the first
3 minutes.
9. At the end you can save the current programme (USER key),
choose a user number 1 to 4 with the cursor key and confirm
by pressing enter.
P1: Incline Profile 1
P1: Incline Profile 2
P1: Incline Profile 3
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Track 5 - 07885-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Track 5 - 07885-400 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 18,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Track 5 - 07885-400

Kettler Track 5 - 07885-400 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info