Manual Kettler Tour 800 - EM1014-400 (page 6 of 29) (English, German, French)

736093

Zoom out

Zoom in

1/29

– EN –

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources of danger,

for example don’t leave any tools lying around. Always dispose packaging

material in such a way that it may not cause any danger. There is always a

risk of suffocation if children play with plastic bags!

n Ensure that you have received all the parts required (see check list) and

that they are undamaged. Should you have any cause for complaint, please

contact your KETTLER dealer.

n Before assembling the equipment, study the drawings carefully and carry

out the operations in the order shown by the diagrams. The correct se-

quence is given in capital letters.

n The equipment must be assembled with due care by an adult person. If in

doubt call upon the help of a second person, if possible technically talen-

ted.

n Please note that there is always a danger of injury when working with tools

or doing manual work. Therefore please be careful when assembling this

machine.

n The fastening material required for each assembly step is shown in the dia-

gram inset. Use the fastening material exactly as instructed.

n First, please screw all parts loosely together and make sure they are pro-

perly positioned. Turn the self-locking nuts, ﬁrst by hand, until resistance is

felt, continuing subsequently against the resistance (security clamp) with

an appropriate tool, according to the indicated torque, until ﬁrm. Check all

screw/bolt connections for ﬁrm ﬁt according to the assembly step. Attention:

self-locking nuts which are loosened once again will become unusable (de-

struction of clamping system) and must be replaced with new ones.

n For technical reasons, we reserve the right to carry out preliminary assembly

work (e.g. addition of tubing plugs).

RISK! Protruding adjustment devices can endanger the movement of the

user.

Handling the equipment

ATTENTION! It is not recommended to use or store the apparatus in a

damp room as this may cause it to rust. Please ensure that no part of the

machine comes in contact with liquids (drinks, perspiration etc.). This may

cause corrosion.

n Before using the equipment for exercise, check carefully to ensure that it

has been correctly assembled.

n Before beginning your ﬁrst training session, familiarize yourself thoroughly

with all the functions and settings of the unit.

n A slight production of noise at the bearing of the centrifugal mass is due to

the construction and has no negative effect upon operation. Possibly oc-

curring noise during reverse pedalling result from engineering and are ab-

solutely safe.

n The exercise cycle has a magnetic brake system.

n To operate correctly, the pulse function requires a minimum voltage of 2,7

volts (only for computers working with batteries).

n Before use, always check all screws and plug-in connections as well as re-

spective safety devices ﬁt correctly.

n Always wear suitable shoes when using.

n For a comfortable training position please adjust the handlebar andsaddle

position to your body height.

n Nobody may be in the moving range of a training person during training

n This manual can be downloaded from www.kettler.com.

n The equipment is dependent / independent of revolutions per minute.

www.kettlersport.com

Maintainance – Service – Spare Parts

n Damaged components may endanger your safety or reduce the lifetime of

the equipment. For this reason, worn or damaged parts should be replaced

immediately and the equipment taken out of use until this has been done.

Use only original KETTLER spare parts.

n To ensure that the safety level is kept to the highest possible standard, de-

termined by its construction, this product should be serviced regulary (once

a year) by specialist retailers.

n Please ensure that liquids or perspiration never enter the machine or the

electronics.

Spare parts order

n When ordering spare parts, always state the full article number, spare-part-

number, the quantity required and the S/N of the product (see handling).

Example order: Art. no. EM xxxx-yyy / spare-part no. 67001415 / 2 pieces

/ S/N ....................

Waste Disposal

KETTLER products are recyclable. At the end of its useful life

please dispose of this article correctly and safely (local refuse

sites).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Tour 800 - EM1014-400 in the language / languages: English, German, French as an attachment in your email.

The manual is 4,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Tour 800 - EM1014-400

Kettler Tour 800 - EM1014-400 User Manual - English, German, French - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Tour 800 - EM1014-400 Manual

Product: