736072
8
Zoom out
Zoom in
Previous page
1/23
Next page
8
EN
obstacles is maintained. In the immediate vici-
nity of the main operational directions, nothing
else should be placed. There should be at least
one meter of free space surrounding the exer-
cise space. – Make sure that no one, other than
the
person who is training, is in the device space
when the device is in motion.
Always observe the general safety rules and pre-
cautions for working with electrical equipment.
Do not use a multiple power socket for the run-
ning belt. If an extension cable is being used, en-
sure that it complies with the VDE regulations.
Unplug the power cord of the device from the so-
cket if not used for a longer period.
The product is not suitable for use by persons
weighing over 130 kg.
Nobody
may be in the moving range of a training
person during training
This exercise machine may only be used for
exercises indicated in the training instructions.
This training device has to be set up on a ho-
rizontal surface under all circumstances. Place
rubber or straw mats under it to deaden any noi-
se or impacts. Only for appliances with weights.
Avoid powerful oscillations of the dumbbells!
When mounting the product please take the re-
commended torque information into account (
= xx Nm).
The actual human performance can differ from
the mechanical performance shown.
Please note: for devices without a freewheel, the
moving parts cannot immediately be stopped.
The symbol identifies devices in Protection
Class I.
The symbol identifies devices in Protection
Class II.
The symbol identifies devices in Protection
Class III.
The training device corresponds with DIN EN
ISO 20957-1:2014/DIN EN ISO 20957-5:2017,
class HA.
The device may only be used with the power
supply units delivered.
HRC Training Program
྇WARNING! If you lose the pulse signal, the per-
formance of the device will remain constant for
approx. 60 seconds and is then slowly adjusted
downwards. Please check your pulse measuring
system (ear clip, hand pulse or chest belt) so
that the pulse signal of the electronics can be
entered again.
INSTRUCTIONS FOR ASSEMBLY
྇RISK! Ensure that your working area is free of possible
sources of danger, for example don’t leave any tools lying
around. Always dispose packaging material in such a way
that it may not cause any danger. There is always a risk of
suffocation if children play with plastic bags!
྇WARNING! Please note that there is always a danger of in-
jury when working with tools or doing manual work. There-
fore please be careful when assembling this machine.
Ensure that you have received all the parts required (see
check list) and that they are undamaged. Should you have
any cause for complaint, please contact your KETTLER
dealer.
Before assembling the equipment, study the drawings ca-
refully and carry out the operations in the order shown by
the diagrams. The correct sequence is given in capital let-
ters.
The equipment must be assembled with due care by an
adult person. If in doubt call upon the help of a second per-
son, if possible technically talented.
The fastening material required for each assembly step
is shown in the diagram inset. Use the fastening material
exactly as instructed.
Bolt all the parts together loosely at first, and check that
they have been assembled correctly. Tighten the locknuts
by hand until resistance is felt, then use spanner to finally
tighten nuts completely against resistance (locking device).
Then check that all screw connections have been tightened
firmly. Attention: once locknuts have been unscrewed they
no longer function correctly (the locking device is destroy-
ed), and must be replaced.
For technical reasons, we reserve the right to carry out
preliminary assembly work (e.g. addition of tubing plugs).
For a comfortable training position please adjust the hand-
lebar andsaddle position to your body height.
HANDLING THE EQUIPMENT
Before using the equipment for exercise, check carefully to
ensure that it has been correctly assembled.
It is not recommended to use or store the apparatus in
a damp room as this may cause it to rust. Please ensure
that no part of the machine comes in contact with liquids
(drinks, perspiration etc.). This may cause corrosion.
The machine is designed for use by adults and children
should not be allowed to play with it. Children at play be-
have unpredictably and dangerous situations may occur for
which the manufacturer cannot be held liable. If, in spite
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler TOUR 300 - EM1011-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler TOUR 300 - EM1011-400 in the language / languages: English, German, French as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler TOUR 300 - EM1011-400

Kettler TOUR 300 - EM1011-400 User Manual - English, German, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info