General Information
WARM UP
(Only in the case of Count Up and Count Down)
The function can only be initiated when the belt
is not moving.
The belt slowly becomes faster if the speed-
value is higher than the value stored under “Per-
sonal Settings”.
Example:
(HRC value)
Value stored= 3.0 km/h,
higher manual setting at start = 6.1 km/h;
WARM UP increases the speed from
3.0 to 6.1 km/h after 30 s
(Value and km/h flashing);
When 6.1 km/h has been reached, WARM UP
goes off and displays the value without flas-
hing.
By pressing “WARM UP” again during flashing,
the function is terminated.
COOL DOWN
The COOL DOWN function can be selected
during training in every program.
Using this function, the speed will reduced stea-
dily to the value saved under “Personal settings”
at the end of the exercise and 30 seconds later
the belt will be turned off. During the COOL
DOWN phase, the value and km/h flash. By
pressing “COOL DOWN” again during flas-
hing, the function is terminated.
Additional remark
Adjustment of the “COOL DOWN and
WARM UP“-value is described on page “21”.
19
GB
GB
Running Belt TORONTO
M9788-T
