4
Assembly Instructions
GB
Handling the equipment
■ Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
■ It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■ The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
■ The exercise cycle complies with the DIN EN 957 - 1/5, class
HA. It is therefore suitable for therapeutic use.
■ Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
■ A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling re-
sult from engineering and are absolutely safe.
■ The exercise cycle has a magnetic brake system.
■ The equipment is independent of revolutions per minute.
■ Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.
■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
■ Always wear suitable shoes when using.
■ Do not use corrosive or abrasive materials to clean the equip-
ment. Ensure that such materials are not allowed to pollute the
environment.
fact that the correct plug-in power supply unit (observe marking)
has been connected properly.
■ Important: Do not under any circumstances carry out electrical
repairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.
■ Important: disconnect the apparatus from the mains before
doing repair, maintenance or cleaning work.
■ Do not use a multiple power socket for the running belt. If an ex-
tension cable is being used, ensure that it complies with the VDE
regulations.
■ When the unit is not in use, unplug it from the power supply.
■ Ensure that the power cable is not pinched and that no-one can
trip over it.
■ All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive ap-
pliances (e.g. mobile telephones) directly next to the cockpit or
the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).
■ Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
■ Any interference with parts of the product that are not described
within the manual may cause damage, or endanger the person
using this machine. Extensive repairs must only be carried out by
KETTLER service staff or qualified personnel trained by KETTLER.
■ Always observe the general safety rules and precautions for
working with electrical equipment.
■ Before beginning your program of training, study the instruc-
tions for training carefully.
■ Our products are subject to a constant innovative quality assu-
rance. We reserve the right to perform technical modifications.
■ In case of enquiry, please contact your KETTLER dealer.
Instructions for Assembly
■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
■ Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
■ Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Always
dispose packaging material in such a way that it may not cau-
se any danger. There is always a risk of suffocation if children
play with plastic bags!
■ The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand un-
til resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all
screw connections have been tightened firmly. Attention: once
locknuts have been unscrewed they no longer function correctly
(the locking device is destroyed), and must be replaced.
■ To pull off the pedal arms remove cap and screw (A). Grip the
pedal arm tightly, and screw in an M12 bolt (not supplied) into
the thread (B). After a few turns you may take off the pedal arm
(C).
■ For technical reasons, we reserve the right to carry out prelimi-
nary assembly work (e.g. addition of tubing plugs).
■ Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
