Manual Kettler RE7 - 07688-100 (page 29 of 200) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

736260

Zoom out

Zoom in

1/200

Pulse Monitoring (Target Pulse)

If you activated the monitoring mode in target pulse, your

pulse will be monitored before and during the work out. Our

fictitious user “Thomas” activated a target pulse of 128. If the

target is overshot by 11 beats (139), the control function dis-

plays a downward pointing

arrow. Conversely, if the target

is undershot by 11 beats (117), an upward pointing

arrow will be displayed

HRL Traffic Light Function = Heart Rate Light

Display colours and their meaning

The function has 3 colours: blue, green and red. In order to provide pro-

minent information on heart rate events, the colours are set as follows:

Red background light (colour=2)

Target heart rate monitoring is active.

The heart rate has risen to be out of the target heart rate monitoring

range (+11 beats) (same as the HI arrow display)

The maximum heart rate has been exceeded during maximum heart

rate monitoring (same as MAXPULSE display).

Green background lighting (colour=3)

Target heart rate monitoring is active and training is underway.

The heart rate has reached the target heart rate and remains within the

target heart rate monitoring range (-/+ 10 beats)

Blue background lighting (colour=4)

The target heart rate monitoring is active and training is underway.

Heart rate has fallen below the heart rate monitoring range (-11

beats) (same as the LO arrow display)

The lower limit will only be displayed, if you are training and

the target pulse had been reached before.

Pulse Monitoring (Maximum Pulse)

If maximum pulse has been activated in pulse monitoring and

the maximum pulse has been overshot,

MAX

and a blinking

arrow will be displayed. If the alarm signal has been

activated (note symbol), an audible double alarm signal will

also be given.

Note:

Recovery Pulse Taking

Recovery pulse means taking the pulse within one minute

while counting down. Your pulse will be taken twice, at the

beginning and at the end of the time interval; from the diffe-

rence, a level of fitness will be calculated. Press “Recovery” to

start a new function.

Display:

Recovery Pulse Rate

Counting down, displaying current pulse rate and pulse

rate at the start of the recovery pulse rate function. The per-

centage indicates the ratio of current pulse rate to maxi-

mum pulse

Press “Cancel” to stop the recovery pulse taking and to jump

to the training stand-by mode, displaying average values.

The recovery pulse function will only be offered, if the pulse

rate is being displayed.

Display:

Recovery Pulse Rate

End of recovery pulse taking, displaying the end pulse

Note:

after 60 seconds, from the difference between the pulse

rates at the start and the end a fitness level will be determi-

ned accordingly.

Press “Back ” to jump to the training stand-by mode, display-

ing average values.

Recovery Pulse Taking and Pulse Loss

If the pulse taking is interrupted, the count down will be com-

pleted, without calculating a fitness level.

Press “Back” to jump to the training stand-by mode, display-

ing average values.

Interrupting or Terminating the training

If there are less than 10 pedal rotations/min or the “reco-

very” function is being pressed the electronic equipment regi-

sters interruptions in the work out. Average values will be dis-

played.

Note:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler RE7 - 07688-100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 12,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler RE7 - 07688-100

Kettler RE7 - 07688-100 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler RE7 - 07688-100 Manual

Product: