736260
22
Zoom out
Zoom in
Previous page
1/200
Next page
Training and operating instructions
22
GB
Quick Start
(Introduction, no settings)
After turning ON the device via the mains switch or pressing
navigation key “Up”, all segments are shown and the total
distance and time are displayed at the bottom.
Readiness for training
After a few seconds, the “Count Up” programme is dis-
played. The person “Guest” is displayed
Start of training
When pedalling, the values for the pedalling frequency,
2“
8“
speed, distance, training time, and energy consumption are
incremented. Pulse (if measurement of pulse is enabled) shows
the current value. The % information above POWER shows the
performance-maximum performance- relation (adjustable by
the trainee).
How to change the performance during the training:
Press “Plus” to increase the performance in steps of 5.
Press “Minus” to reduce the performance in steps of 5.
Interruption of training
An interruption of the training is detected in case of less than
10 pedal revolutions/min. Pedalling frequency and speed
show “0”.
Pedalling frequency, speed, performance and pulse (if measu-
rement of pulse is enabled) are displayed as average values.
Distance, energy consumption and training time are displayed
as total values.
“Menu”, “User” will be explained on page 5 ff, “Display”on
page 9, “Presettings” on page 7“, CoolDown” and “WarmUp
on page 12/13.
Stand mode
If you do not continue the training and do not press any but-
tons, the display automatically switches to standby mode. You
can define the time for this in the “settings/standby” menu. If
you press the navigation key “Up” or start/continue your trai-
ning, the display will switch back to the ready-to-train mode.
Note:
Pedal rate
Value 0 – 199
Conversion
Average (AVG
single = request:
pedal slower/faster
both = dependent from
rotation speed
Average (AVG
Speed
Conversion selec-
table
Value 0 – 99,9
Distance
Value 0 – 249
Time
Value 0 – 99,59
Energy Consumption
Conversion selec-
table
Conversion selec-
table
Value 0 – 9999
Performance
Conversion
Value 0 – 600
Average (AVG
Max. perform. achieved in
HRC mode
Curr. perform./
Max perform.
Puls
Heart symbol (blinks)
Alarm ON/OFF
Percentage
Curr. pulse/max pulse
Value 0 – 220
Conversion
Target pulse
Target pulse
undershot -11[LO]
Maximal Puls
Average (AVG
Warning (blinks) max.pulse +1
Target pulse overshot +11
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler RE7 - 07688-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler RE7 - 07688-100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 12,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler RE7 - 07688-100

Kettler RE7 - 07688-100 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info