■The running belt should be used only for its intended purpose,
i.e. for physical exercise (walking and jogging) by one (1) adult
persons. The treadmill is only intended for use indoors.
■ RISK! Heart rate monitoring systems may be inaccurate. Over
exercise may result in serious injury or death. If you feel faint
stop exercising immediately.
■The running belt is not suitable for commercial use
■Any other use of the equipment is prohibited and may be dan-
gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment. This training
device is for home use only.
■Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.
■The running belt has been designed in accordance with the
latest standards of safety. Incorrect repairs and structural modi-
fications (e.g. removal or replacement of original parts) may
endanger the safety of the user.
■The training machine must be positioned on a horizontal, stable
surface. Place suitable cushioning material underneath it for
shock absorption and to stop if from slipping (rubber mats or
similar).
You must ensure that the connection line is not jammed and does
not pose a tripping hazard.
■Always ensure that the space under the running belt is kept free,
i.e. that there are no objects, pets etc. beneath it.
■Never touch the moving belt with your hands. Also ensure that
there are no objects close to the belt or the rollers which could
be pulled into it thus causing injury or damaging the unit itself.
■The running belt is not suitable for use by persons weighing
over 120 kg.
■This treadmill is a motorised training device that requires speci-
al safety precautions and knowledge when being operated.
People with diminished physical, sensory or mental capacities as
well as children must be given instructions on the proper use of
the device and must never use the device unattended.
■The device's continuous sound level at maximum speed is 72
dB.
■The unit should be positioned in such a way that there is a space
of 100 cm on both sides and 200 cm behind it.
■The mains adapter requires a mains voltage of 230 V, 50 Hz.
It should be connected only to grounded safety socket with a
single 16-A fuse. Do not under any circumstances carry out elec-
trical repairs or alterations yourself. Always ensure that such
work is done by a properly qualified electrician.
■The training appliance must only be used with the appropriate
Kettler-made power-pack.
■Do not use any multiple sockets for connection purposes! If using
an extension line, this must satisfy the VDE guidelines.
■If not being used for a longer period of time, remove the
device's mains adapter from the socket.
■You must remove the mains adapter when performing all repair,
maintenance and cleaning work.
■Repairs on the electrical components in the unit should be car-
ried out by qualified persons only.
■Always observe the general safety rules and precautions for
working with electrical equipment.
■All electric appliances emit electromagnetic radiation when in
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-
mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these instruc-
tions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.
All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The knowledge
gained in this process is used to constantly improve and develop our products. In order to offer our customers the very best in product quality, we reserve the right to make
technical changes at any time. In spite of this, should you have any cause for complaint, please contact your KETTLER dealer.
H
andhabung
Bandjustierung: Die Bandjustierung geschieht während des Band-
laufes bei einer Geschwindigkeit von ca 6 km/h (ggf. weniger) Bei
der Justierung darf keine Person auf dem Band laufen!
Wandert das Band nach rechts, drehen Sie die rechte Stellschrau-
b
e (Bild H4) mit dem beiliegenden Steckschlüssel um maximal eine
Viertel Umdrehung im Uhrzeigersinn.Belaufen Sie das Band und
kontrollieren den Lauf. Wiederholen Sie den Vorgang solange, bis
das Band wieder gerade läuft.
Weicht das Band nach links ab, drehen Sie die rechte Stellschrau-
be (Bild H4) mit dem beiliegenden Steckschlüssel um maximal eine
Viertel Umdrehung gegen den Uhrzeigersinn.Belaufen Sie das
B
and und kontrollieren den Lauf. Wiederholen Sie den Vorgang
solange, bis das Band wieder gerade läuft.
Bandstraffung: D
rehen Sie die Stellschraube (Bild H4) max. eine
Umdrehung im Uhrzeigersinn. Wiederholen Sie den Vorgang an
der anderen Seite. Kontrollieren Sie, ob das Endlosband durch-
rutscht. Ist dies der Fall, müssen Sie den beschriebenen Vorgang
noch einmal durchführen.
Gehen Sie bei der Bandjustierung und -straffung sehr sorgfältig
vor; eine extremeÜber- oder Unterspannung kann zu Schäden
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Kettler Race - 07884-300 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Kettler Race - 07884-300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.
The manual is 8,02 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
