772983
50
Zoom out
Zoom in
Previous page
1/128
Next page
MY20K10 - 12_1.0_11.01.2021 50
Operation
6.3 Error message
6.3.1 On-board computer
The drive system monitors itself continuously and
displays a number as an error message if a known
error is detected. The system may switch off
automatically depending on the type of error.
Code Description Method of resolution
410 One or more on-board
computer buttons are
blocked
Check whether buttons are
jammed because dirt has
accumulated between them,
for example.
Clean buttons if necessary.
414 Control panel connection
problem
Contact specialist dealer.
Have ports and connections
checked.
418 One or more buttons on
the control panel are
blocked
Check whether buttons are
jammed because dirt has
accumulated between them,
for example.
Clean buttons if necessary.
419 Configuration error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
422 Motor connection problem Have ports and connections
checked.
423 Battery connection
problem
Have ports and connections
checked.
424 Communication error with
components communi-
cating with one another
Have ports and connections
checked.
426 Internal time-out error It is not possible to display or
adjust the tyre size in the basic
settings menu in this error status.
1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
430 On-board computer
battery flat
Charge the battery (in its
mount).
431 Software version error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
440 Internal motor error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
450 Internal software error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
460 USB connection error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
Table 29: List of on-board computer error messages
490 Internal on-board
computer error
Have on-board computer
checked.
500 Internal battery error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
502 Fault in the lighting 1Check the light and its
cabling.
2Re-start the system.
3Contact your specialist
dealer if the problem
persists.
503 Speed sensor error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
504 Speed signal manipu-
lation detected
Check position of spike
magnets and re-adjust if
necessary.
Check for manipulation.
Assistance from drive has
been reduced.
510 Internal sensor error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
511 Battery internal error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
530 Battery error 1Switch off system.
2Remove the battery.
3Re-insert battery.
4Re-start electric drive
system.
5Contact your specialist
dealer if the problem
persists.
531 Configuration error 1Re-start the system.
2Contact your specialist
dealer if the problem
persists.
540 Temperature error
The S pedelec is outside
the permitted temperature
range.
1Switch off the system to cool
the motor and battery down
or warm them to the
permitted temperature
range.
2Re-start the system.
3Contact your specialist
dealer if the problem
persists.
550 An inadmissible electrical
load has been detected 1Remove consumer.
2Re-start the system.
3Contact your specialist
dealer if the problem
persists.
Code Description Method of resolution
Table 29: List of on-board computer error messages
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Quadriga Duo CX Speed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Quadriga Duo CX Speed in the language / languages: English as an attachment in your email.

The manual is 14.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Quadriga Duo CX Speed

Kettler Quadriga Duo CX Speed User Manual - German - 131 pages

Kettler Quadriga Duo CX Speed User Manual - Dutch - 128 pages

Kettler Quadriga Duo CX Speed User Manual - Danish - 126 pages

Kettler Quadriga Duo CX Speed User Manual - French - 129 pages

Kettler Quadriga Duo CX Speed User Manual - Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info