772983
46
Zoom out
Zoom in
Previous page
1/128
Next page
MY20K10 - 12_1.0_11.01.2021 46
Assembly
5.5.2.2 Kabolt axle
Only applies to FOX forks with Kabolt axles
The procedure for installing the 15 x 100 mm and
15 x 110 mm Kabolt axles is the same.
1Place the front wheel in the fork ends of the
fork. Push the Kabolt axle through the fork end
on the non-drive side and hub.
Figure 55: Pushing the Kabolt axle in
2Tighten the Kabolt axle screw to 17 Nm
(150 in-lb) with a 6 mm hex key.
5.5.3 Checking the stem and handlebars
5.5.3.1 Checking the connections
1Stand in front of the S pedelec to check
whether the handlebars, stem and fork steerer
are firmly attached to one another. Clamp the
front wheel between your legs. Grasp the
handlebar grips.
2Try to twist the handlebars towards the front
wheel.
The stem must not move or twist.
5.5.3.2 Firm hold
1Place your entire body weight on the
handlebars with the quick release lever closed
to check that the stem is firmly in place.
The handlebars shaft must not move
downwards in the fork steerer.
2If the handlebars shaft should move in the fork
steerer, increase the quick release lever
tensioning. To do so, turn the knurled nut
slightly clockwise with the quick release lever
open.
3Close the lever and check the stem is firmly in
position.
5.5.3.3 Checking the headset backlash
1To check the handlebar headset backlash,
close the quick release lever on the stem.
2Place the fingers of one hand on the upper
headset cup. Pull the front wheel brake with the
other hand and try to push the S pedelec
backwards and forwards.
3The headset cup halves must not move
towards one another while you are doing this.
Note that there may be noticeable backlash
due to worn-out bearing bushes or brake lining
backlash in suspension forks and disc brakes.
4If there is headset backlash in the steering
headset, you must adjust it as soon as
possible; otherwise, the headset will become
damaged. You must make the adjustment as
described in the stem manual.
5.6 Selling the S pedelec
Complete the S pedelec pass on the operating
and maintenance instructions envelope.
Note down the manufacturer and the number of
the battery key.
Adjust the S pedelec to the rider; see
Section 6.5.
Adjust the stand and shifter.
Instruct the operator or rider on how to use all
the S pedelec functions.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Quadriga Duo CX Speed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Quadriga Duo CX Speed in the language / languages: English as an attachment in your email.

The manual is 14.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Quadriga Duo CX Speed

Kettler Quadriga Duo CX Speed User Manual - German - 131 pages

Kettler Quadriga Duo CX Speed User Manual - Dutch - 128 pages

Kettler Quadriga Duo CX Speed User Manual - Danish - 126 pages

Kettler Quadriga Duo CX Speed User Manual - French - 129 pages

Kettler Quadriga Duo CX Speed User Manual - Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info