772983
40
Zoom out
Zoom in
Previous page
1/128
Next page
MY20K10 - 12_1.0_11.01.2021 40
Assembly
3Press to push the battery cover onto the
battery. In doing so, ensure that the battery
On-Off switch fits through its designated slot in
the cover.
Figure 31: Pushing the battery cover onto battery
The battery cover will lock into the fitting
grooves on the battery.
The battery can now be inserted into the frame.
5.4.4 Fit battery cover onto Bosch
PowerTube 500 battery (horizontal)
1Detach the upper interface (lock side) from the
Bosch PowerTube 625 battery with a
TORX® T20 wrench.
Figure 32: Detaching the upper interface
2Fasten the PowerTube extension to the Bosch
PowerTube 500 battery using the two
M4 x 8 T20 screws supplied. In doing so,
ensure that the closed side faces the front of
the battery (towards On-Off switch). The
smooth upper surface of the PowerTube
extension must face upwards, away from the
battery.
Figure 33: Fitting the PowerTube extension
3Screw the battery mounting plate onto the
PowerTube extension with original Bosch
screws (M4 × 8 T20). To do so, use the
PowerTube extension screw plate as a counter
support. When positioning the extension,
ensure that the removal tab faces the front of
the battery.
.
Figure 34: Fastening the battery mounting plate
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Quadriga Duo CX Speed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Quadriga Duo CX Speed in the language / languages: English as an attachment in your email.

The manual is 14.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Quadriga Duo CX Speed

Kettler Quadriga Duo CX Speed User Manual - German - 131 pages

Kettler Quadriga Duo CX Speed User Manual - Dutch - 128 pages

Kettler Quadriga Duo CX Speed User Manual - Danish - 126 pages

Kettler Quadriga Duo CX Speed User Manual - French - 129 pages

Kettler Quadriga Duo CX Speed User Manual - Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info