773012
89
Zoom out
Zoom in
Previous page
1/125
Next page
MY20K01-12_1.0_12.06.2019 89
Operation
6.13.6 Adjusting the compression in a
Rock Shox damper
Only applies to pedelecs with this equipment
The compression damper controls the speed at
which the rear frame damper deflects during slow
impact, such as smaller impacts or when the rider
goes round a corner or shifts their weight. The
damper improves control and efficiency.
If the compression damper is set too high, the
suspension is too hard during impacts. The lever
is used to set the compression damper.
Turn the setting wheel in a clockwise direction (+)
to decrease the deflection speed.
Turn the setting wheel in an anti-clockwise
direction (–) to increase the deflection speed.
Figure 83: Setting the compression damper strength using
the rear frame damper setting lever (1)
6.14 Gear shift
The selection of the appropriate gear is a
prerequisite for a physically comfortable ride and
making sure that the electric drive system
functions properly. The ideal pedalling frequency
is between 70 and 80 revolutions per minute.
It is advisable to stop pedalling briefly when
changing gears. This makes it easier to switch
gears and reduces wear on the drivetrain.
6.14.1 Using the derailleur gears
Only applies to pedelecs with this equipment
The speed and range can be increased while
applying the same force if you select the right
gear. Use the derailleur gears.
Figure 84: Down shifter (1) and up shifter (2) on the left (I)
and right (II) gear shift
Select the appropriate gear with the shifter.
The gear shift switches the gear.
The shifter returns to its original position.
Clean the rear derailleur if the gear change
blocks.
1
III
1
22
1
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Quadriga - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Quadriga - 2020 in the language / languages: English as an attachment in your email.

The manual is 18.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Quadriga - 2020

Kettler Quadriga - 2020 User Manual - German - 125 pages

Kettler Quadriga - 2020 User Manual - Dutch - 128 pages

Kettler Quadriga - 2020 User Manual - French - 131 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info