736086
6
Zoom out
Zoom in
Previous page
1/28
Next page
6
Handling the equipment
n Before using the equipment for exercise, check carefully to ensure that it
has been correctly assembled.
n It is not recommended to use or store the apparatus in a damp room as this
may cause it to rust. Please ensure that no part of the machine comes in
contact with liquids (drinks, perspiration etc.). This may cause corrosion.
n The machine is designed for use by adults and children should not be allo-
wed to play with it. Children at play behave unpredictably and dangerous
situations may occur for which the manufacturer cannot be held liable. If, in
spite of this, children are allowed to use the equipment, ensure that they
are instructed in its proper use and supervised accordingly.
n A slight production of noise at the bearing of the centrifugal mass is due to
the construction and has no negative effect upon operation. Possibly oc-
curring noise during reverse pedalling result from engineering and are ab-
solutely safe.
n To operate correctly, the pulse function requires a minimum voltage of 2,7
volts (only for computers working with batteries).
n Before beginning your first training session, familiarize yourself thoroughly
with all the functions and settings of the unit.
n This manual can be downloaded from www.kettlersport.com.
n Calibration of the device can only be carried out by the manufacturer.
n This device is an RPM-independent / dependent training device, depense
on the Computer Modus.
n The training device has a electromagnetic brake system.
Instructions for Assembly
RISK! Ensure that your working area is free of possible sources of danger,
for example don’t leave any tools lying around. Always dispose packaging
material in such a way that it may not cause any danger. There is always a
risk of suffocation if children play with plastic bags!
WARNING! Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be careful when as-
sembling this machine.
n Ensure that you have received all the parts required (see check list) and
that they are undamaged. Should you have any cause for complaint, please
contact your KETTLER dealer.
n Before assembling the equipment, study the drawings carefully and carry
out the operations in the order shown by the diagrams. The correct se-
quence is given in capital letters.
n The equipment must be assembled with due care by an adult person. If in
!
!
doubt call upon the help of a second person, if possible technically talen-
ted.
n The fastening material required for each assembly step is shown in the dia-
gram inset. Use the fastening material exactly as instructed.
n Bolt all the parts together loosely at first, and check that they have been as-
sembled correctly. Tighten the locknuts by hand until resistance is felt, then
use spanner to finally tighten nuts completely against resistance (locking
device). Then check that all screw connections have been tightened firmly.
Attention: once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.
n For technical reasons, we reserve the right to carry out preliminary assembly
work (e.g. addition of tubing plugs).
WARNING! Protruding adjustment devices can endanger the movement
of the user.
!
– EN –
200912 Manual 1024_400 Optima 600 de,en,fr_HA 14.09.2020 09:18 Seite 6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler OPTIMA 600 - CT 1024-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler OPTIMA 600 - CT 1024-400 in the language / languages: English, German, French as an attachment in your email.

The manual is 15,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler OPTIMA 600 - CT 1024-400

Kettler OPTIMA 600 - CT 1024-400 User Manual - English, German, French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info