■ Bewahren Sie die Originalverpackung des Gerätes gut auf,
damit sie später u. U. als Transportverpackung verwendet wer-
den kann.
■ Aus fertigungstechnischen Gründen behalten wir uns die Vor-
montage von Bauteilen (z.B. Rohrstopfen) vor.
Bandjustierung:Die Bandjustierung geschieht während des Band-
laufes bei einer Geschwindigkeit von ca 6 km/h (ggf. weniger)
Bei der Justierung darf keine Person auf dem Band laufen!
Wandert das Band nach rechts, drehen Sie die rechteStellschraube
(Bild H5) mit dem beiliegenden Steckschlüssel um maximal eine
Viertel Umdrehung im Uhrzeigersinn.Belaufen Sie das Band und
kontrollieren den Lauf. Wiederholen Sie den Vorgang solange, bis
das Band wieder gerade läuft.
Weicht das Band nach links ab, drehen Sie die rechteStellschrau-
be (Bild H5) mit dem beiliegenden Steckschlüssel um maximal eine
Viertel Umdrehung gegen den Uhrzeigersinn.Belaufen Sie das
Band und kontrollieren den Lauf. Wiederholen Sie den Vorgang
solange, bis das Band wieder gerade läuft.
Bandstraffung: Drehen Sie die Stellschraube (Bild H5) max. eine
Umdrehung im Uhrzeigersinn. Wiederholen Sie den Vorgang an
der anderen Seite. Kontrollieren Sie, ob das Endlosband durch-
rutscht. Ist dies der Fall, müssen Sie den beschriebenen Vorgang
noch einmal durchführen.
Gehen Sie bei der Bandjustierung und -straffung sehr sorgfältig
vor; eine extremeÜber- oder Unterspannung kann zu Schäden
am Laufband führen!
KETTLER GmbH
SERVICECENTER
Henry-Everling-Str. 2
D-59174 Kamen
D
www.kettler.net
+49 2307 974-2111
+49 2938 819-2004
Email über Kontaktformular:http://de.kettler.net/kontakt/service.html
e-mail:
+43 662 620501 0
+43 662 620501 20
office@kettler.at
KETTLER Austria GmbH
Ginzkeyplatz 10
5020 Salzburg
www.kettler.at
A
Servicehotline Schweiz:
0900 785 111
Trisport AG
Im Bösch 67
CH – 6331 Hümenberg
www.kettler.ch
CH
Handhabung
surface. Place suitable cushioning material underneath it for
shock absorption and to stop if from slipping (rubber mats or
similar).
You must ensure that the connection line is not jammed and does
not pose a tripping hazard.
■ Always ensure that the space under the running belt is kept free,
i.e. that there are no objects, pets etc. beneath it.
■ Never touch the moving belt with your hands. Also ensure that
there are no objects close to the belt or the rollers which could
be pulled into it thus causing injury or damaging the unit itself.
■ The running belt is not suitable for use by persons weighing
over 180kg. The max loading weight for desk is 40kg.
■ This treadmill is a motorised training device that requires special
safety precautions and knowledge when being operated.
■ The device's continuous sound level at maximum speed is 75dB.
Noise emission under load is higher than without load.
■ The unit should be positioned in such a way that there is a space
of 100 cm on both sides and 200 cm behind it.
■ The mains adapter requires a mains voltage of 230 V, 50 Hz.
It should be connected only to grounded safety socket with a
single 16-A fuse. Do not under any circumstances carry out elec-
All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The know-
ledge gained in this process is used to constantly improve and develop our products. In order to offer our customers the very best in product quality, we reserve the
right to make technical changes at any time. In spite of this, should you have any cause for complaint, please contact your KETTLER dealer.
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain
information which is important for your safety as well as for the use and maintenance of the appliance. Keep
these instructions in a safe place for reference purposes, maintenance work and to assist you when ordering spare
parts.
–EN –Important Instructions
For Your Safety
■ The running belt should be used only for its intended purpose,
i.e. for physical exercise (walking and jogging) by one (1) adult
persons. The treadmill is only intended for use indoors.
■ The running belt is not suitable for commercial use
■ Any other use of the equipment is prohibited and may be dan-
gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment. This training
device is for home use only.
■ Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediatelyand the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.
■ The running belt has been designed in accordance with the
latest standards of safety. Incorrect repairs and structural modi-
fications (e.g. removal or replacement of original parts) may
endanger the safety of the user.
■ The training machine must be positioned on a horizontal, stable
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Kettler Office Track - 07895-500 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Kettler Office Track - 07895-500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.
The manual is 5,11 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
