Manual Kettler Narvik - 7040-100 (page 17 of 20) (English, German, Dutch, French, Italian, Polish, Swedish, Spanish)

737599

Zoom out

Zoom in

1/20

7040-560, 7041-560: Montage des Netzhalters

19mm

1 Réglez l’epaisseur des plateaux en déposant les cales des 2 côtés.

Sélectionnez l’épaisseur souhaitée (dans ce cas 19mm) puis re-

mettre les cales sur les plateaux.

2 Fixez les poteaux entre les 2 demi-plateaux (3).

4 Passez la barre de tension à travers le filet.

5 Fixez la barre de tension sur le poteau.

6 Prenez la corde et faite un noeud sur la patte de réglage.

7 Passez la corde dans la rainure de la barre de tension (4). Tendre le

filet en fixant la patte de réglage (7) sur la pointe du poteau.

3 1 2

1 Adjustment knob; pull knob off net post and select desired thickness

(i.e. 19mm)

2 Slide the netposts between the table halves (3).

4 Slide the tension pin through net

5 Place pin in designated slots

6 Tie tension string to plastic tension tab.

7 Place tension string in slots over tension pin and net post. Adjust net

tension by adjusting plastic tension tab.

1 Plattenstärken-Einsteller beidseitig vom Netzhalter abziehen. Ge-

wünschte Plattenstärke (z.B. 19mm) wählen und Plattenstärken–Ein-

steller entsprechend wieder aufstecken.

2 Netzhalter zwischen Plattenhälften (3) schieben.

4 Netzstange durch seitliche Netzkante schieben.

5 Netzstange in Aussparungen am Netzhalter einstecken.

6 Spannfaden mit Kunststofflasche verknoten.

7 Spannfaden über obere Einkerbung in Netzstange (4) führen. Netz

spannen durch entsprechende Einklinkung der Kunststofflasche (7)

am Netzhalter-Dorn.

7040-560, 7041-560: Instructions for Assembling the net set

7040-560, 7041-560: Instructions de montage pour l’ensemble poteaux-filet

1 Verwijder de insteller van de plaatdikte aan beide kanten. Kies de

gewenste plaatdikte (bijv. 19mm) en zet de insteller van de plaatdik-

te overeenkomstig er weer op.

2 Schuif de nethouder tussen de twee platen (3).

4 Schuif de netstang door de zijkant van het net.

5 Steek de netstang in uitsparingen van de nethouder.

6 Knoop het spandraad door kunststof lus.

7 Laat het spandraad via inkeping boven in de netstang (4) lopen.

Span het net door de kunststof lus op het haakje van de nethouder

te klemmen.

7040-560, 7041-560: Montage van de netpost

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Narvik - 7040-100 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Narvik - 7040-100 Manual

Product: