5
Instructions for Assembly
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
■ Ensure that you have received all the parts required (see check
list ) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
■ Please note that there is always a danger of injury when work-
ing with tools or doing manual work. Therefore please be care-
ful when assembling this machine.
■ Ensure that your working area is free of possible sources of dan-
ger, for example don’t leave any tools lying around. Always dis-
pose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children
play with plastic bags!
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
■ The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as in-
structed. The required tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand un-
til resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all
screw connections have been tightened firmly. Attention: once
locknuts have been unscrewed they no longer function correctly
(the locking device is destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out prelimi-
nary assembly work (e.g. addition of tubing plugs).
■ For machines with rope systems: please ensure that all ropes are
fixed correctly. This is especially important for latissimus bars.
Assembly Instructions
GB
List of spare parts
When ordering spare parts, always state the full article number,
spare–part number, the quantity required and the inspection num-
ber stamped on the back.
Example order: Art. no. 7713-500 / spare-part no. 10100016 /
2 pieces / inspection no......
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material“.
KETTLER GB Ltd. · Kettler House, Merse Road · North Moons
Moat · Redditch, Worcestershire B98 9HL
KETTLER International Inc. · 1355, London Bridge Road ·
USA–Virginia Beach, Virginia 23450
http://www.kettler.net
Handling the equipment
■ When choosing a place for the equipment please ensure that
the floor can withstand the additional weight/load.
■ Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
■ During exercise, ensure that all the necessary safety elements
are in place and that they cannot work loose. Before use, al-
ways check all screws and plug-in connections as well as re-
spective safety devices fit correctly.
■ Do not set the equipment up in rooms which are frequently used
or close to doors, entries etc.
■ It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■ The surface on which the unit is placed must be firm and even.
Place rubber or straw mats under it to deaden any noise or im-
pacts. Only for appliances with weights. Avoid powerful oscil-
lations of the dumbbells!
■ The unit is designed for use by adults and children should not
be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the man-
ufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
■ Basically this equipment does not need any special maintenance.
■ Do not use corrosive or abrasive materials to clean the equip-
ment. Ensure that such materials are not allowed to pollute the
environment.
■ Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Instructions de montage
Lire attentivement les présentes instructions avant le montage et la première utilisation de l'appareil. Elles contiennent
des renseignements importants relatifs à la sécurité des personnes ainsi qu'à l'emploi et à l'entretien de la station d'en-
traînement. Conserver soigneusement lesdites instructions pour d'éventuels renseignements ainsi que pour effectuer
l'entretien de l'appareil ou commander des pièces de rechange.
F
