735984
6
Zoom out
Zoom in
Previous page
1/32
Next page
6
GB
tains small parts).
Concerning products with pneumatic tyres: tighten the valve caps at all times and keep
off children's reach (Choking hazard - contains small parts).
Handling
Before use always check that all screws and plug-in connections and respective safety devi-
ces fit correctly.
Instruct children in the correct use of the product, and draw their attention to possible dangers.
Please note that pedals on any wheeled toy without freewheeling appliance will turn even
if the product is being pushed or is coasting.
This wheeled toy does not have a so-called parking brake. Therefore secure the vehicle
against rolling away. Do not leave children, who are not old enough to use the wheeled
toy, unattended on a product.
If this product can be adjusted please adapt it to your child’s height.
Do not transport anything on this product.
Never use corrosive or abrasive substances to clean the toy. Never use substances which
may cause pollution of the environment.
Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil
every two or three months.
For models with pneumatic tyres: When leaving wheeled toys with pneumatic tyres on floors
containing solvents or which have been glued with such solvents (e.g. PVC) they may possi-
bly stain it due to a chemical reaction with the natural product caoutchouc. If in doubt place
something underneath the wheels. Ensure that air pressure in the tyres is correct (1,7 bar/24
PSI); if air pressure is too low this increases wear, and makes riding the toy more difficult!
Assembly of the toy vehicle
Please ensure that the vehicle will only be used for playing when assembly has been car-
ried out correctly, and checked, by an adult.
The toy vehicle must be assembled carefully by an adult person. Study the assembly instruc-
tions carefully before beginning work. Assemble the vehicle in the exact sequence shown by
the letters in the diagrams. This is essential for the safe function and use of the toy vehicle.
Please note that there is
always
a danger of injury when working with tools or doing manu-
al work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don’t
leave any tools lying around. Always dispose packaging material in such a way that it
may not cause any danger. There is always a risk of suffocation if children play with pla-
stic bags!
Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw connec-
tions have been tightened firmly. Attention: once locknuts have been unscrewed they no
longer function correctly (the locking device is destroyed), and must be replaced.
When assembling plastic grips: The grips can be pushed onto the handlebars more easily
if they are first soaked in warm water.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
!
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Kettcar FORMEL 1 AIR - 08870-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Kettcar FORMEL 1 AIR - 08870-700 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info