Manual Kettler Hybritec (page 5 of 15) (English)

803716

Zoom out

Zoom in

1/15



Charging the Battery

Before using it for the first time, the battery must be charged for at least four hours. When deli-

vered, the battery is in the uncharged state and is in sleeping mode.

The battery can be charged in any state i.e. at any charge level.

Removing the battery

To charge the battery, it first has to be removed from the cycle.

1. To release the lock, turn the key to the left in anticlockwise direction.

2. Hold the charger by the handle and tilt it 45° to the side.

3. Lift the battery out of its rack.

IMPORTANT: For safety reasons, always remove the key.

Charging process

1. Place the battery in the holder in the charging unit.

2. Connect the charging unit to the power supply by inserting the plug into a 220 V socket.

3. The battery is fully charged when all 5 LEDs light up. The current status of the charging

process is always displayed during charging.

4. Remove the plug from the power socket and then take the battery out of the charging unit.

Charging the Battery

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Hybritec in the language / languages: English as an attachment in your email.

The manual is 2.24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Hybritec Manual

Product: