5
until repaired. If required please only use original KETTLER spare parts.
■ Improper repairs and structural alterations (disassembly of original parts, fitting of not permitted parts,
etc.) may cause danger for the user or affect the life span of the product.
■ Please ensure that the vehicle will only be used for playing when assembly has been carried out cor-
rectly, and checked, by an adult.
■ Although there is practically no danger to children when using the vehicle according to its intended
purpose, you should always supervise play activities.
■ As the product is only a toy it should not be used on public roads, because it does not conform to the
road traffic regulations.
■ Please bear in mind that there is always a danger of children injuring themselves (falling off, tipping
over etc.) whilst using swings, climbing frames, tricycles or similar equipment.
■ Do not connect this toy to any other product; because this child’s wheeled toy has not been designed
for higher speeds.
■ Please bear in mind that children are very often not able to judge their own capabilities and certain
(dangerous) situations. Also consider that a natural urge to play plus their temperament may lead chil-
dren into unforeseen situations for which the manufacturer cannot be held responsible.
■ Please ensure that the wheeled toy is only used in surroundings free of danger.
■ This wheeled toy does not have lights. It is dangerous to use it in the dark.
Handling
■ Before use always check that all screws and plug-in connections and respective safety devices fit cor-
rectly.
■ Instruct children in the correct use of the product, and draw their attention to possible dangers.
■ Sturdy, closed footwear must be worn when using this product.
■ This wheeled toy does not have a so-called parking brake. Therefore secure the vehicle against rolling
away. Do not leave children, who are not old enough to use the wheeled toy, unattended on a pro-
duct.
■ If this product can be adjusted please adapt it to your child’s height.
■ Do not transport anything on this product.
■ Never use corrosive or abrasive substances to clean the toy. Never use substances which may cause
pollution of the environment.
■ Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or
three months.
■ For models with pneumatic tyres: When leaving wheeled toys with pneumatic tyres on floors contai-
ning solvents or which have been glued with such solvents (e.g. PVC) they may possibly stain it due
to a chemical reaction with the natural product caoutchouc. If in doubt place something underneath
the wheels. Ensure that air pressure in the tyres is correct (2,5 bar); if air pressure is too low this in-
creases wear, and makes riding the toy more difficult!
Assembly of the toy vehicle
■ The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions care-
fully before beginning work. Assemble the vehicle in the exact sequence shown by the letters in the di-
agrams. This is essential for the safe function and use of the toy vehicle.
■ Please note that there is always a danger of injury when working with tools or doing manual work.
Therefore please be careful when assembling this machine.
■ Ensure that your working area is free of possible sources of danger, for example don’t leave any tools
lying around. Always dispose packaging material in such a way that it may not cause any danger.
There is always a risk of suffocation if children play with plastic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten
