493357
38
Zoom out
Zoom in
Previous page
1/60
Next page
Training and operating instructions
Settings -> 4. Stand-by
Here the turn-off time of the display is set in case no key is
activated or no training is carried out.
By pressing “Back” the settings are adopted.
Settings -> 5. Programmes
Reset
Here you can reset the programmes to the original program-
mes of the individual programme groups. The modifications of
the programmes are deleted.
Pressing “Delete” will delete the modified programmes and
restore the original programmes.
Pressing “Back” will skip to the menu “Settings”.
Settings -> 6. Chip Card
Here the chip card is formatted. By formatting, a “User K” is
added to the users 1-4. The user-related data can be entered
in the menu “User Data”. They are saved on the card.
The function is only available in appliances with a card reader.
Pressing “Format” will start this operation.
By pressing “Back” you skip to the menu “Settings”.
• Use only original KETTLER chip cards.
• Insert the card with a slight push into the slot.
• If the card is not read, turn the card around.
Note:
Note
General Information
System beeps
Switch-on
Upon switching-on during the segment test, a short beep
is heard.
End of programme
A programme end (profile programmes, count-down) is
indicated by a short beep.
Exceeding maximum pulse
If the preset maximum pulse is exceeded by one pulse
beat, every 5 seconds two short beeps can be heard.
Error indication
In case of an error, 3 short beeps can be heard.
Recovery
In this function, the flywheel mass is braked automatically.
Further training is not recommended.
Calculation of the fitness grade (F):
Grade (F) = 6.0 – (
10 x
(P1–P2)
)
2
P1
P1 stress pulse, P2 = recovery pulse
F1.0 = very good, F6.0 = insufficient
Switching time/distance
With the programmes “Performance Profiles”, you can switch
the profile per column in the settings from time mode (1 minu-
te) to distance mode (400 metres or 0.2 miles). Cross ergome-
ter: (200 metres or 0.1 miles).
Profile display during training
At the beginning the first column is flashing. After that, one
column after the other is flashing, from left to right during trai-
ning.
18
GB
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Ergometer XTR2 07862-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Ergometer XTR2 07862-600 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Ergometer XTR2 07862-600

Kettler Ergometer XTR2 07862-600 Installation Guide - English - 28 pages

Kettler Ergometer XTR2 07862-600 User Manual - German - 20 pages

Kettler Ergometer XTR2 07862-600 Installation Guide - German, Dutch, French, Italian, Polish, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info