Manual Kettler Ergo C10 - 07689-880 (page 5 of 52) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

662997

Zoom out

Zoom in

1/52

Handling the equipment

ATTENTION! It is not recommended to use or store the appa-

ratus in a damp room as this may cause it to rust. Please ensure

that no part of the machine comes in contact with liquids (drinks,

perspiration etc.). This may cause corrosion.

■ Before using the equipment for exercise, check carefully to en-

sure that it has been correctly assembled.

■ Before beginning your first training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

■ A slight production of noise at the bearing of the centrifugal

mass is due to the construction and has no negative effect upon

operation. Possibly occurring noise during reverse pedalling re-

sult from engineering and are absolutely safe.

■ The exercise cycle has a magnetic brake system.

■ To operate correctly, the pulse function requires a minimum vol-

tage of 2,7 volts (only for computers working with batteries).

■ The equipment is dependent of revolutions per minute.

■ Before use, always check all screws and plug-in connections as

well as respective safety devices fit correctly.

■ Always wear suitable shoes when using.

■ For a comfortable training position please adjust the handlebar

andsaddle position to your body height.

■ Nobody may be in the moving range of a training person du-

ring training

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around. Al-

ways dispose packaging material in such a way that it may

not cause any danger. There is always a risk of suffocation if

children play with plastic bags!

■ Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the dia-

grams. The correct sequence is given in capital letters.

■ The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if

possible technically talented.

■ Please note that there is always a danger of injury when wor-

king with tools or doing manual work. Therefore please be ca-

reful when assembling this machine.

■ The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as in-

structed.

■ First, please screw all parts loosely together and make sure they

are properly positioned. Turn the self-locking nuts, first by hand,

until resistance is felt, continuing subsequently against the resi-

stance (security clamp) with an appropriate tool, according to

the indicated torque, until firm. Check all screw/bolt connec-

tions for firm fit according to the assembly step. Attention: self-

locking nuts which are loosened once again will become

unusable (destruction of clamping system) and must be replaced

with new ones.

■ For technical reasons, we reserve the right to carry out prelimi-

nary assembly work (e.g. addition of tubing plugs).

– EN –

Maintainance – Service – Spare Parts

■ Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged

parts should be replaced immediately and the equipment taken

out of use until this has been done. Use only original KETTLER

spare parts.

■ To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should be

serviced regulary (once a year) by specialist retailers.

■ Please ensure that liquids or perspiration never enter the ma-

chine or the electronics.

Spare parts order

■ When ordering spare parts, always state the full article num-

ber, spare-partnumber, the quantity required and the S/N of

the product (see handling).

Example order: Art. no. 07689-200 / spare-part no.

67001415 / 2 pieces / S/N ....................

Waste Disposal

KETTLER products are recyclable. At the end of its use-

ful life please dispose of this article correctly and safely

(local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road

North Moons Moat

Redditch, Worcestershire B98 9HL

www.kettler.co.uk

+44 1527 591901

+44 1527 62423

sales@kettler.co.uk

e-mail:

KETTLER International Inc.

1355 London Bridge Road

Virginia Beach, VA 23453

www.kettlerusa.com

USA

+1 888 253 8853

+1 888 222 9333

sales@kettler.co.uk

e-mail:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Ergo C10 - 07689-880 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 29,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Ergo C10 - 07689-880

Kettler Ergo C10 - 07689-880 User Manual - English, German, Dutch, French, Italian, Spanish - 122 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Ergo C10 - 07689-880 Manual

Product: