736166
4
Zoom out
Zoom in
Previous page
1/48
Next page
4
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-
mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-
structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.
For Your Safety
RISK! While assembly of the product keep off children’s
reach (Choking hazard - contains small parts).
RISK! The device requires a supply voltage of 230V, 50 Hz.
– Connect the power cord with a grounded protective contact
socket.
RISK! Any other use of the equipment is prohibited and may
be dangerous. The manufacturer cannot be held liable for da-
mage or injury caused by improper use of the equipment.
RISK! Instruct people using the equipment (in particular child-
ren) on possible sources of danger during exercising.
RISK! Do not under any circumstances carry out electrical re-
pairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.
RISK! disconnect the apparatus from the mains before doing
repair, maintenance or cleaning work.
RISK! Incorrect repairs and structural modifications (e.g. re-
moval or replacement of original parts) may endanger the sa-
fety of the user.
RISK! Heart rate monitoring systems may be inaccurate. Over
exercise may result in serious injury or death. If you feel faint
stop exercising immediately.
RISK! All electric appliances emit electromagnetic radiation
when in operation. Please do not leave especially radiation-
intensive appliances (e.g. mobile telephones) directly next to
the cockpit or the electronic controlsystem as otherwise values
displayed might be distorted (e.g. pulse measurement.
RISK! Ensure that the power cable is not pinched and that no-
one can trip over it.
WARNING! The training device should be used only for its
intended purpose, i.e. for physical exercise by adult people.
WARNING! Before beginning your program of training, stu-
dy the instructions for training carefully.
WARNING! Any interference with parts of the product that
are not described within the manual may cause damage, or
endanger the person using this machine. Extensive repairs
must only be carried out by KETTLER service staff or qualified
personnel trained by KETTLER.
WARNING! This training device is for home use only.
WARNING! If you lose the pulse signal, the performance of
the device will remain constant for approx. 60 seconds and
is then slowly adjusted downwards. Please check your pulse
measuring system (ear clip, hand pulse or chest belt) so that
the pulse signal of the electronics can be entered again.
The training device has been designed in accordance with
the latest standards of safety. Any features which may have
been a possible cause of injury have been avoided or made
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
as safe as possible.
The training device corresponds with DIN EN ISO 20957-
1/DIN EN 957-9, class HA. It is therefore suitable for thera-
peutic use.
In case of enquiry, please contact your KETTLER dealer.
If the equipment is in regular use, check all its components
thoroughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the
attachment of grip strap, running plate and fastening of the
handlebar and front tube.
Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment.
Base your program of exercise on the advice given by your
doctor. Incorrect or excessive exercise may damage your
health!
Before use, always check all screws and plug-in connections
as well as respective safety devices fit correctly.
Always wear suitable shoes when using.
Our products are subject to a constant innovative quality as-
surance. We reserve the right to perform technical modifica-
tions.
In choosing the location of the apparatus, ensure a sufficient
safety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (pa-
ths, doorways, corridors). The exercise area is 1 metre all aro-
und the training device. A clearance area of 0.6 metres must
also be provided all around. If the training devices are stan-
ding right next to each other the devices can share the clea-
rance area (see digram below).
Always observe the general safety rules and precautions for
working with electrical equipment.
Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the
VDE regulations.
Unplug the power cord of the device from the socket if not
used for a longer period.
Nobody may be in the moving range of a training person du-
ring training
This exercise machine may only be used for exercises indica-
ted in the training instructions.
This training device has to be set up on a horizontal surface
under all circumstances. Place rubber or straw mats under it
to deaden any noise or impacts. Only for appliances with
weights. Avoid powerful oscillations of the dumbbells!
When mounting the product please take the recommended
torque information into account ( = xx Nm).
Instructions for Assembly
RISK! Ensure that your working area is free of possible sour-
ces of danger, for example don’t leave any tools lying aro-
und. Always dispose packaging material in such a way that
it may not cause any danger. There is always a risk of suffo-
cation if children play with plastic bags!
WARNING! Please note that there is always a danger of in-
jury when working with tools or doing manual work. Therefo-
!
!
re please be careful when assembling this machine.
Ensure that you have received all the parts required (see
check list) and that they are undamaged. Should you have
any cause for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings careful-
ly and carry out the operations in the order shown by the dia-
Important Instructions
GB
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler CTR 4 - 07862-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler CTR 4 - 07862-900 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 16,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info