736058
24
Zoom out
Zoom in
Previous page
1/40
Next page
Training and Operating Instructions
24
EN
and the cable. Always attach the cable with a clip at your clothing
or, even better, at your headband.
With breast clip
The internal pulse receiver is compatible to un-coded POLAR chest
strap transmitters. For coded systems, wrong pulse values may be
displayed. We recommend T34 by POLAR. Please observe the cor-
responding instructions.
A plug-in receiver is not necessary and should not be used for technical
reasons.
Comment:
Only one way of pulse measurement is possible: either with ear clip
or with hand pulse or with breast belt. If no ear clip is located in the
pulse plug, hand pulse measurement is activated. If you insert an ear
clip in the pulse plug, hand pulse measurement is automatically
deactivated. It is not necessary to disconnect the plug of the hand
pulse measurement.
Faults in the Training Computer
If the computer display is not functioning correctly, please remove the
power supply and switch off the machine.
General information
System signals
Activation of the device
If you activate the device, a signal is emitted during the segment test.
Presetting
A short signal is emitted, if you reach a presetting like time, distance and
KJoule/kcal.
Exceeding of maximum pulse
If the set maximum pulse is exceeded by one pulse beat, two short signals
are emitted for the time of exceedance.
Calculation of fitness score
The computer calculates and assess the difference between the trai-
ning and recovery heart rate and the resulting "fitness score" accor-
ding to the following formula:
P1 = Training pulse P2 = Recovery pulse
Score 1 = very good Score 6 = poor
A comparison of the training and recovery heart rate is a quick and
easy way in which to determine physical fitness. The fitness score is
an orientation value to asses your recovering ability after physical
exercise. Before pressing the recovery heart rate button and deter-
mining your fitness score, you should train at your own level of inten-
sity for a significant period of time e.g. 10 minutes. For regular car-
diovascular training you will discover that your "fitness score" impro-
ves.
Possibilities for Pulse Measurement
The pulse measurement starts as soon as the heart in the display
blinks in time with your pulse beat.
With hand pulse
An extra-low voltage caused by the contractions of your heart is regi-
stered by the hand sensors and evaluated by the electronics assem-
bly of the device.
Always grab the contact faces with both hands.
Avoid jerky grasping.
Hold your hands calmly and avoid contractions and rubbing on
the contact faces.
With ear clip
The pulse sensor works with infrared light and measures the variati-
ons in translucence in your skin, which are produced by your pulse
beat. Rub your ear ten times strongly to activate the blood circulation
before attaching the pulse sensor to your earlobe.
Avoid disturbing pulses.
Attach the ear clip properly to your earlobe and look for the best
point for the measurement (heart symbol blinks without interrupti-
on).
Do not train directly under strong incidence of light, e.g. neon
light, halogen light, spotlight, sun light.
Completely eliminate any shocks or bounces of the ear sensor
Note (F) = 6.0 –
(
10 x (P1–P2)
)
2
P1
optional
optional
optional
For Your Safety:
Before beginning your program of exercise, consult your doctor to
ensure that you are fit enough to use the equipment. Base your pro-
gram of exercise on the advice given by your doctor. Incorrect or
excessive exercise may damage your health.
200325 Comp-UM6786_7_03_20.de,en,fr_final_Layout 1 25.03.2020 10:40 Seite 24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Avior P - HT1003-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Avior P - HT1003-300 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Avior P - HT1003-300

Kettler Avior P - HT1003-300 Installation Guide - English, German, French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info