7
Instructions for Assembly
CAUTION! When installing the product, keep children at a safe distance (small parts
which can be swallowed).
■ Ensure that you have received all the parts required (see check list) and that they are un-
damaged. Should you have any cause for complaint, please contact your KETTLER dea-
ler.
■ Before assembling the equipment, study the drawings carefully and carry out the opera-
tions in the order shown by the diagrams. The correct sequence is given in capital letters.
■ The fastening material required for each assembly step is shown in the diagram inset. Use
the fastening material exactly as instructed. The required tools are supplied with the equip-
ment.
■ The equipment must be assembled with due care by an adult person. If in doubt call upon
the help of a second person, if possible technically talented.
■ Please note that there is always a danger of injury when working with tools or doing ma-
nual work. Therefore please be careful when assembling this machine.
■ Ensure that your working area is free of possible sources of danger, for example don’t
leave any tools lying around. Always dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if children play with plastic
bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw
connections have been tightened firmly. Attention: once locknuts have been unscrewed they
no longer function correctly (the locking device is destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
– EN –
Maintainance – Service – Spare Parts
■ Damaged components may endanger your safety or reduce the lifetime of the equipment.
For this reason, worn or damaged parts should be replaced immediately and the equip-
ment taken out of use until this has been done. Use only original KETTLER spare parts.
■ To ensure that the safety level is kept to the highest possible standard, determined by its
construction, this product should be serviced regulary (once a year) by specialist retai-
lers.
Spare parts order
■ When ordering spare parts, always state the full article number, spare-partnumber, the
quantity required and the S/N of the product (see handling).
Example order: Art. no. 0S01056-0000 / spare-part no. 94211719 / 2 pieces / S/N
....................
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article cor-
rectly and safely (local refuse sites).
