526383
8
Zoom out
Zoom in
Previous page
1/76
Next page
8
4.2 Pulse zones
with the +/– keys you select 2 zones. The age setting serves for the calcu-
lation of these pulse zones. This is visible with the % display (5).
1. Burning of fat [Fa 65%] (Picture 12)
Formula: (220 - age) x 0.65
2. Fitness Zone [Fi 75%] (Picture 13)
Formula: (220 - age) x 0.75
Picture 12 Picture 13
Pulse zone: burning of fat with 65% Pulse zone: Fitness with 75%
Function
Through the setting of the pulse zones and the assumed maximum pulse, a
pulse zone supervision is activated. If the set exercise pulse falls short of 11
beats, the display shows “LO“, if 11 beats are exceeded „HI“. The “LO“ su-
pervision is active if first the given exercise pulse is reached while pedaling.
If the rotation number falls below 20, the “LO“ function becomes active
again when the given exercise pulse has been reached. The “HI“ supervi-
sion is always active.
If the maximum pulse is exceeded by 1 beat, “HI“ will blink and “MAX“ ap-
pears. If the acoustic alarm is active, you will be able to hear the alarm si-
gnal. The value which is displayed with the % symbol is the comparison
between current pulse value and maximum pulse value.
4.3 Pulse supervision (depending on age)
This setting is possible in the area from 40 – 188 with the +/– keys.
Picture 14 Picture 15
No setting “OFF” Pulse value setting e.g. 150 with HI
LO symbol
Function
The “HI” and ”LO” display functions as described in 4.2.
The proportional pulse display as well as the acoustic alarm function are not
available.
4.4 Finishing the settings
After the last setting, if you press the set key, your setting values (except for
pulse setting) will be displayed (Picture 16).
If you have activated a pulse zone, under (5) the comparison between the
current pulse value and the maximum pulse value or “– –“ (Picture 17) with
missing pulse signal will be shown.
Picture 16 Picture 17
Pulse zone setting (compare Picture
12/13)
Picture 11
Age setting e.g. 31 with maximum
pulse display 189
Function
Start pedaling. All setting values count backwards, blink at zero for a cou-
ple of seconds and then count from the setting value upwards. In addition,
short signal tones are emitted.
If your pulse beat exceeds the entered pulse limit or your maximum pulse
exceeds it, first the HI and then the MAX symbol will be displayed.
5.0 Display while exercising
When you start exercising, in 5 second tact an automatic display change
SCAN will begin (symbol b in the display). With the set key, you can shut
it off. With the +/– keys you can then jump forward or back a display area.
6.0 Display before exercising, with breaks in the exerci-
sing, end
If you make less than 20 pedal rotations/min, the electronics recognize a
break in the exercising. An automatic display changestops. The SCAN sym-
bol disappears. Below KM/H (3), RPM (4) and pulse (5) the average sym-
bol (e) and the average value is displayed.
If you do not continue exercising within 4 minutes, the display changes to
room temperature (Picture 1). In doing so, the distance is added in full ki-
lometers. All other values are not stored.
Note
Speed (3) and distance (3) change in 5 second tact.
With the +/– keys, you can jump forward or back one display area.
With the set key, you return to the setting mode. In doing so, all previous
exercise data will be deleted. Settings remain.
7.0 Display when continuing exercising
Start exercising again. The values continue to count.
8.0 Measuring recovery pulse
The exercise computer is equipped with a recovery pulse function. This
makes it possible to measure your recovery pulse when you finish exerci-
sing.
When you finish exercising, press the recovery key. The current pulse value
is taken over under Time (1) (Picture 18). The computer measures your pulse
during a 59 seconds countdown(Picture 18). Afterwards, the current pulse
value is taken over under Kilojoule (2) and under KM/H (3) the difference
of the pulse values within the return are given and a fitness grade is dis-
played with (F) (Picture 19). The calculation is explained under 9.0 Gene-
ral. If the measurement of the pulse is interrupted, instead of a value (P) is
displayed. If you press the recovery key, the current exercise display will ap-
pear again.
The current pulse is always shown under Pulse (6).
Picture 18 Picture 19
Picture 20 Picture 21
Picture 18: Measurement of the recovery pulse with time return (0:59 -
0:00)
Picture 19: Fitness grade display
Picture 20: No recognition of pulse (E) with recovery pulse measurement
Picture 21: No recovery pulse function (E)
Note:
If no pulse value is displayed, the recovery pulse function is not activated.
GB
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler 07956-500 Crossbike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler 07956-500 Crossbike in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler 07956-500 Crossbike

Kettler 07956-500 Crossbike Installation Guide - English, German, Dutch, French, Italian, Polish, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info