Type of pulse measurement
The pulse measurement can be carried out in two ways:
1. Ear clip
The plug is put into the pulse female connector;
2. built-in receiver and Polar chest strap T34
(please refer to the appropriate instructions)
)
The cross ergometer XTR2 is additionally equipped with hand
pulse sensors.
Appliance interface
The USB interface to the PC is located at the backside of the
display panel
The cross ergometer XTR2 has a serial interface RS 232.
Remark:
Remark:
Short description
The electronic system has a functional area with keys and a
display area (display)
Display area / display
The display has 76800 (320 x 240) pixels, displaying both
words and diagrams.
Keys
Function keys
By means of these 4 keys, you can activate functions, which
are then shown in the above display, e.g. Back, Menu etc.
The functions of the keys may vary from one menu to the
other.
Navigation keys
By means of the navigation keys, you can select menu items
in the menu.
Enter keys minus - / plus +
By means of these keys, you can alter values, adjust the stress
values for training and shift profiles.
• “Plus” increases the values or alters settings
• “Minus” reduces the values or alters settings
• Press “Plus” or “Minus” for a longer period of time > quick
modification
• Press “Plus” and “Minus” at the same time:
• Stress skips to smallest performance
• Programmes skips to default setting
• Value input skips to Off
3
GB
SE1/SE2
Keys
Display area
Display
Pulse female
connector
Display values
The illustrations show the operation as wheel
ergometer.
If the rotation speed corresponds to the
example values on the display, the values
for speed and distance at the cross ergono-
meters are lower.
At a pedal rate of 60 min-1
Wheel ergometer = 21.3 km/h
Cross ergometer = 9.5 km/h
