SM3616-68 / SM3656-68
29
GB
Training Stillstand
Strain
✔✔
Profile
✔✔✔ ✔✔✔
Distance
✔✔
Time
✔✔
Energy
✔✔
Max. Pulse
✔✔✔✔✔ ✔✔✔ ✔✔
or
Fat burning
65%
or
Fitness
75% ✔✔ ✔ ✔
or
Manually
40-90%
Target pulse
40-200 ✔✔ ✔ ✔
Time/Distance Swichover
✔✔✔ ✔✔✔
Recovery
✔✔✔✔✔ ✔✔✔ ✔✔
Input and functions
Strain
Profile
Exceeding
Value / Input % MAX
Maximal Pulse 121-210
✔
+1 +1 +1
Off
Target pulse
Fat burning
65%
or Fitness
75%
✔
+11 –11*
or Manually
40-90%
Target pulse 40-200 +11 –11*
*note: appears only, if the target pulse was achieved once
}
Display in case of pulse events
If the entered training pulse (-11 beats) is
undercut, the symbol “
LO
” is shown.
If it is exceeded (+11 beats) the symbol
“
HI
” is shown.
If the maximum pulse is exceeded, the “
HI
”
arrow is flashing and the writing “
MAX
” is
shown.
If the “alarm sound in case of exceeding
the maximum pulse” is activated in
individual settings (page 30), additional
sounds are output.
}
Display colours and their meaning:
The display can illuminate in 3 different colours: blue, green and red. To ensure an obvious notification of pulse events the meaning of
the colours are defined as follows:
The display illuminates blue if the following conditions apply:
• The pulse monitoring is deactivated
• The target pulse monitoring (-/+ 10 pulses) is active but not reached yet.
• The target pulse monitoring is deactivated, the pulse limit monitoring is active but the pulse is below the selected pulse limit.
• You are in the default area.
The display illuminates green:
The pulse is within the range of the target pulse monitoring (-/+ 10 pulses)
The display illuminates red:
If the pulse limit is exceeded while the pulse limit monitoring is active the display turns red.