457785
25
Zoom out
Zoom in
Previous page
1/104
Next page
25
GB
SM 9150-75
User presetting (U1 / U2 / U3 / U4 / U0)
Using the USER button, the desired or preset user
can be selected.
If the machine has to be disconnected from the
mains and reconnected for e.g. due to a change in
location, the input personal user data will be retai-
ned when the machine is restarted (U1 to U4).
U 0 can be selected for a guest user.
IMPORTANT! No training data is saved using this
USER setting (TIME, DISTANCE and CALORIES)! This
data is only counted during a training session.
RECOVERY
The RECOVERY button can be used to activate the
recovery heart rate measurement after your training
session.
Heart rate measurement
The heart rate measurement can be taken in 3
ways:
1. Hand pulse sensor (standard)
2. Ear clip (optional)
The plug is connected to a socket in the machine.
3. Chest strap without receiver (optional)
The receiver is built into this electronic unit behind
the display. If an ear clip is plugged in, this must
be removed. The POLAR T34 chest strap without
a plug-in receiver is available as an accessory
(Item no. 67002000).
Display functions
General
The display is divided into four separate display
areas
1. The top row displays information on the status or
selected training program
2. The top left zone gives information on the current
user (U 0-4) and user-specific data is recorded:
gender, age and weight.
Using this input data, the computer calculates
data relating to heart rate and the level of intensi-
ty during training.
3. The large screen which displays a graphic image
of the training distance (course profile) offers sim-
ple user guidance during the training session.
One bar = low intensity; 16 bars above one ano-
ther = maximum intensity.
4. Below the user display and in the entire bottom
row of the screen, there are several adjacent sym-
bols where the different target values and training
units are displayed. When presetting these units,
the functional symbol will blink > e.g. TIME.
G
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler 07648-560 Moto P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler 07648-560 Moto P in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info