Manual Kettler 07647-800 Cross M (page 15 of 84) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

605008

Zoom out

Zoom in

1/84

UT6886/UT6887

• Pressing “MODE” stops and starts the display change.

• When defaults are reached for time, distance and

Kjoule/Kcal

(0-values), brief signal tones are output and the bottom display

areas flash. From now, the values count upwards again.

• If the input pulse value is exceeded, the bottom pulse display

flashes as a warning.

Interruption or End to Training

If there are fewer than 15 cadences/min, the electronics detects

that training has been interrupted. STOP SCAN is shown in the

display and the training data is displayed in rotation.

→ RPM or SPEED → TIME → DISTANCE →Kjoule/Kcal→ PULSE →

ODO → etc.

• Pressing “MODE” stops and starts the display change.

The training data is displayed for 4 minutes. If you do not press

any buttons or train in this time, the electronics switches to

standby mode and displays the time.

An interruption to training is detected with a delay of a few

seconds.

Resuming Training

If you continue the training within 4 minutes, the

last values continue counting or count downwards.

RECOVERY Recovery pulse stage

The RECOVERY function can be used after each exercise

program.

The RECOVERY button is used to initiate recovery pulse

measurement at the end of exercising. Initial and final pulse

during one minute are used to calculate deviation and a fit-

ness score. In case of equal exercising, improvement of such

score is a measurement for increase of fitness.

When reaching the target values, end exercising and press

the RECOVERY button; then, leave your hands at the hand

pulse sensors. In case of previous pulse measurement, the

display shows 00:60 for time, and the PULSE display shows

the current pulse value (flashing). The countdown starts at

00:60. Leave your hands at the hand pulse sensors until the

countdown reaches >0<. The display will show on its right a

value between F1 and F6. F1 is the best status; F6 is the

worst status. The function can be ended by pressing again

RECOVERY.

If no pulse is measured in the beginning or at the end of the

reverse counting, the error message “Err” is displayed.

Comment:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler 07647-800 Cross M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler 07647-800 Cross M

Kettler 07647-800 Cross M Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler 07647-800 Cross M Manual

Product: