457799
28
Zoom out
Zoom in
Previous page
1/92
Next page
Training and operating instructions
28
GB
Personal exercise settings
General
– Without any particular pre-settings, the values of the
individual parameters will be counted upwards start-
ing at >0< [TIME; DISTANCE, CALORIES and
PULSE].
For efficient exercising it is sufficient to set a target
value for only one pre-setting [TIME; DISTANCE,
CALORIES or PULSE].
If a personal target value is set as exercise pre-set-
ting, then the computer counts downwards starting
at this value. When reaching the target value >0<
an alarm will sound. If exercising is continued - with-
out setting a new target value - then the computer
will count downwards again in this mode - starting
at the pre-set value - after pressing the START button.
Set target values cannot be changed during exercis-
ing, but only after pressing the STOP button.
Pre-setting of target value
Setting of target values is the same with all parameters:
e.g. DISTANCE
1. Press the MODE button until the name >DISTANCE<
flashes in the display segment.
2. Short pressing of the button “+” increases the value,
e.g. DISTANCE, in 0.1 km steps. When keeping the
“+” button pressed, increasing steps will be larger. If
a high value is to be set, then the “–” button can
also be used to directly jump from the minimum
value to the maximum value: e.g. from DISTANCE
0.00 to 99.90 K
3. If you want to reduce the target value, press the “–”
button (for a short or long time).
4. When the target value is set, press the MODE but-
ton. The value is then stored, and you can access
the next function, e.g. CALORIES.
5. If possible, only enter one pre-set value, because
otherwise the exercise targets may overlap, e.g.
when reaching the pre-set time target earlier than
the pre-set load target.
6. The other parameters [TIME, CALORIES or PULSE]
are also set as stated in 1-4 using the buttons SET,
RESET and MODE.
After completion of all pre-settings, press the
START/STOP button and start exercising.
During exercising all current values are displayed next
to each other. The pre-set value is counted downwards
to >0<.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler 07638-100 Giro GT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler 07638-100 Giro GT in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info