677859
6
Zoom out
Zoom in
Previous page
1/188
Next page
KETRONSD9Manual&Tutorial
6
1. GETTING AROUND THE SD9 PRO QUICKLY – NAVIGATION
Before we get started, let’s see how to set up the SD9 PRO by taking a look at the connections on the back (as
shown in Fig. A. below). This will enable us to better understand how the SD9 PRO interacts with the outside world.
Fig. A.
Thanks to its clean design, the SD9 PRO has most of its connectors tugged away in the back, allowing it to easily
interface with various optional devices. Let’s take a closer look at the back … from left to right.
ON/OFF:- This is the power switch used to power the instrument on or off. Please note that once you turn
on the instrument, it may take about 30 second for it to completely boot up as it loads the various data
needed for operation. Also, when you turn off the keyboard, allow about 10 seconds for it to properly save
all relevant material and power down. Do not disconnect power to the instrument while it is powered on or
powering down!
DC9V/4A:- Mains power supply socket. For proper functioning, connect only the supplied power adaptor
to the instrument (which is an automatic 110v ~ 240v adaptor). Warrantee could be voided if a different
power adaptor is used!
SUSTAIN:- Connect the optional KETRON sustain pedal to this jack. The Sustain pedal can be used to
play the piano or other Sounds (as on a standard piano), but can also be programmed to be used as a Rotor
switch to switch the rotor Leslie organ speed between fast or slow when using Organ sounds, or to prevent
the arranger from recognizing and changing chords when playing as a solo pianist (PIANIST MODE
Sustain Pedal turned on).
USB:- Connect the SD9 Pro to a computer using a standard USB printer cable. This port can be used for 2
purposes (which are discussed in more detail underMIDIon page 160):-
o MIDI IN/OUT:- Rather than using 2 standard 5 pin Midi DIN cables to connect to the MIDI IN1
(GM) and MIDI OUT port, the SD9 Pro is capable of communicating with external MIDI devices
via the USB port using just one USB cable (when MENU – MIDIUSB MIDI is turned on).
This facilitates using the sound engine of the SD9 Pro from Midi based software like Cubase or
Cakewalk or Sonar … etc.
o DATA:- The SD9 pro can be connected to a computer via this port such that the contents of its
internal Solid State Drive (or optional SSD drive if installed) can be managed via an external
computer. This allows you to quickly and simply drag and drop files between the SD9 Pro and
your computer’s storage devices (when MENU – MIDI – USB MIDI is turned off!)
o USB Pen Drives:- There are 3 USB ports located at the front – top of the panel (a
s shown in Fig.
B. below) for use with USB devices such as sticks, Pen drives, external Hard drives … etc
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ketron SD9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ketron SD9 in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ketron SD9

Ketron SD9 Quick start guide - English - 28 pages

Ketron SD9 User Manual - German - 206 pages

Ketron SD9 Quick start guide - German, French, Italian, Portuguese, Spanish - 28 pages

Ketron SD9 Additional guide - All languages - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info