THE F1-F10 FUNCTION PUSH BUTTONS
There are five push buttons to the left and five to the right of the display. They are called that as they have no specific function (apart from
calling up the menus as already explained), but they take on the function of the command displayed next to them. If you take a close look you
will see that a blue line connects each function push button that relates to a specific area on the display. This area, when there are choices or
commands available, displays a rectangle that bears the name of either the function, of the Voice or of the style to be called up.
DATA ENTRY
There are various possibilities based on the parameter to be modified within a menu.
Direct call up: for the Voices and the styles, the selecting of one of these using a function push button immediately calls them up.
Enabling and disabling: Some parameters may have an ON status and Off status, Active or Inactive and the function push button related to that
parameter is used to alternate between the two.
Selection of a line of parameters: Likewise for Program editing, the function push button is used to select a group of parameters, the value of
which is entered using the VALUE +/- push buttons.
Parameters in the middle of the display: Likewise for Voice editing, some parameters may be found in the middle of the display and are accessed
using the CURSOR +/- push buttons.
Calling up a Midi file: TTogether with the manual selection of a Midi file from a directory, it is also possible to directly select the Midi file to be
loaded, with the MASTER FOLDER enabled, by entering the number of the Midi file using the numeric keypad (STYLES push buttons).
Calling up a Single RAM Style: Using the enabled SINGLE RAM STYLE push button, a style can be called up from hard disk by directly entering
the number associated with it.
Entering words or letters: When saving some files the DG100 requests the entry of words, which can be done using the keys on the keyboard to
which letters and numbers are assigned. The CURSOR +/- push buttons are used to move within the letters of the name and the VALUE +/-
push buttons are used to enter the required letter.
.
DG100 Owner’s Manual
14