Manual Ketron Audya series (page 33 of 204) (English)

677862

Zoom out

Zoom in

1/204

KETRON • AUDYA 33

Wave Sync

Figure 40

Figure 41

Figure 42

NOTE

1) No limitations to add same audio track on different

points of MIDI file.

2) User can assign just one single Wave at a time.

3) If a Wave have the parameter Repeat set into Loop

mode (before the value 1) then all the others Waves

associates to the MIDI file having a subsequent Start

bar will be ignored.

Wave Sync

WAVE SYNC Environment allows to assign several

wave tracks synchronized to MIDI track by MIDI

clock. On this feature you can assign Starting /Stop /

Repeat measure for each Wave track assigned.

1. WAVE and MIDI tracks must be located on the

same folder.

2. Use F8 button to select WAVE SYNC feature .This

action allows to Create or Edit your WAVE SYNC

files.

3. Enter into the MIDI player and select the MIDI file

to be edit and press Load MIDI (F10). Display will

show a loading pop-up message. Once loading

procedure will be completed PLAY and STOP

function will be available on F10 button to listen

the MIDI file. This function is also replicated by

the Start button on Main layout (Figure 40).

4. Now add your own Wave on MIDI file. Use panel

arrows to navigate on desiderated Waves and

then press ADD LOOP (F8) button to assign

(Figure 41).

5. Once Wave Loop will be assigned Audya’s

display will show info and properties related to

this file:

• F1 - Wav: This value show the Wave’s progressive

number.

• F2 - Name: name of selected Wave.

• F3 - Bpm: Beat per minute of selected Wave in

case on a Drum Loop. This basically info will be

used to sync your Audio file onto the MIDI clock.

Correct BPM information is essential to define the

best synchronization between Audio and MIDI.

The BPM value can be modified also when Audio

and MIDI are playing.

• F4 – Start: Start information for the Wave file.

User can define just only Audio Start bar as the

Stop bar will be defined automatically according

to Length and Repeat parameters.

• F5 - Length: Length on bars for the Wave.

This value will define the right length for the

Wave performance. Pay attention when set this

parameter to obtain the correct playing and stop

point for your audio track..

• F6 - Repeat: This function select the number of

repetitions for the Wave. When set to the Loop

value (before the number 1) the Audio track will

be repeated from it’s initial Start bar until the end

of the MIDI file.

• F7 - Remove Wav: allows to remove the selected

Wave.

• F8- Add Wav: this command permit to add the

Wav to the MIDI file.

• F9 - Play Wav: allow to Play the selected Wave

(Figure 42).

6. Once all parameters are set properly the user

can arrange a sort of preview of the final project

simply by playing the MIDI file (F10).

7. In order to save the new MIDI + Audio

combination it’s enough to press SAVE on the

panel. Give a new name and confirm again with

the button 5 / 10 – Save.

8. The playback is obtained by selecting the new

MIDI file and starting with Enter. The Wave volume

may be adjusted separately from MIDI by the

slider Wave.

9. In order to add other tracks repeat carefully point

from #5 to #7 .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ketron Audya series in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ketron Audya series

Ketron Audya series User Manual - German - 206 pages

Ketron Audya series User Manual - French - 204 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ketron Audya series Manual

Product: