706677

Kenwood ZJM810 Mesmerine Manual

4
Zoom out
Zoom in
Previous page
1/109
Next page
4
English
before plugging in
l
Make sure your electricity supply is
the same as the one shown on the
underside of your kettle.
l
WARNING: THIS APPLIANCE
MUST BE EARTHED.
l
This appliance conforms to EC
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first
time
1 Wrap any excess cord around the
bracket
e on the underside of the
powerbase.
2 Fill to ‘MAX’, boil, then pour the
water away. Repeat 3 times.
key
a lid
b on/off switch
c 360° powerbase
d power on light
e cord wrap
f filter
A water level gauge
to use your kettle
1 Fill the kettle by removing the lid.
The water level must be between
‘MAX’ and ‘MIN’ (250mls) on the
water level gauge inside the kettle
(A).
l
If you live in a hard water area we
recommend that you use filtered
water in order to maintain the
appearance and efficiency of your
kettle.
l
Be economical: do not boil more
water than you need.
l
To improve the quality of your
drinks always use fresh water.
l
Empty the kettle after each use.
l
Rinse out with fresh water if the
kettle has not been used for more
than 2 days.
2 Check the lid is fitted correctly.
3 Plug in and switch on. The power
on light
d will come on.
4 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
Note - To interrupt the
boiling ensure that the
switch is in the off position
before removing from the
powerbase.
l
If you experience problems
with your kettle switching
on and off during use or
switching off before boiling,
check that the flat element
is free from scale - see
“descaling”.
l
Your kettle is fitted with a filter to
hold back limescale particles.
l
If you find drops of water under
your kettle, do not worry - it is just
condensation.
boil-dry protection
l
If you switch on with too little
water, your kettle will cut out
automatically. Switch off, remove
from the powerbase and let it cool
down before re-filling. When it has
cooled down, the switch will reset
itself.
care and cleaning
l
Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
l
Wipe with a damp cloth, then
dry. Do not use abrasives - they
will scratch the metal and plastic
surfaces.
the inside
l
Wipe with bicarbonate of soda on
a damp cloth. Rinse thoroughly.
l
Even though your kettle comes
with a filter, you still need to clean
the inside (and the filter) regularly.
the filter (B+C)
1 Remove the lid.
2 Lift the filter out away from the
spout area (B).
3 either rinse under the tap or use
a soft brush or when descaling
your kettle, drop the filter in too.
Rinse thoroughly.
4 Place the filter back in the spout
area and push down to secure (C).
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood ZJM810 Mesmerine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood ZJM810 Mesmerine in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info