678656
4
Zoom out
Zoom in
Previous page
1/101
Next page
4
English
key
a lid
b water level gauge
c on/off switch
d power on light
e 360° powerbase
f cord wrap
g filter
to use your kettle
1 Fill the kettle through either the spout
or by removing the lid. The water
level must be between ‘MAX’ and
1 cup (250mls).
l
If you live in a hard water area we
recommend that you use filtered
water in order to maintain the
appearance and efficiency of your
kettle.
l
Be economical: do not boil more
water than you need.
l
To improve the quality of your drinks
always use fresh water.
l
Empty the kettle after each use.
l
Rinse out with fresh water if the
kettle has not been used for more
than 2 days.
2 Check the lid is fitted correctly.
3 Plug in and switch on. The power on
light
d will come on.
4 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
Note - To interrupt the boiling
ensure that the switch is
in the off position before
removing from the powerbase.
l
If you experience problems
with your kettle switching
on and off during use or
switching off before boiling,
check that the flat element
is free from scale - see
“descaling”.
l
Your kettle is fitted with a filter to
hold back limescale particles.
l
If you find drops of water under
your kettle, do not worry - it is just
condensation.
boil-dry protection
l
If you switch on with too little water,
your kettle will cut out automatically.
Switch off, remove from the
powerbase and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.
care and cleaning
l
Before cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
l
Wipe with a damp cloth, then
dry. Do not use abrasives - they
will scratch the metal and plastic
surfaces.
the inside
l
Wipe with bicarbonate of soda on a
damp cloth. Rinse thoroughly.
l
Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 Remove the lid.
2 Lift the filter out away from the spout
area
1.
3 either rinse under the tap or use a
soft brush or when descaling your
kettle, drop the filter in too. Rinse
thoroughly.
4 Place the filter back in the spout
area and push down to secure
2.
descaling
l
Regular descaling of the flat element
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
l
problems may be experienced
with the kettle switching on and
off during use or switching off
before boiling.
l
the kettle may take longer to boil.
l
the flat element may be damaged.
Please note: Failure to descale your
kettle may invalidate your guarantee.
l
When limescale starts to build up on
the heating element, buy a suitable
descaler and descale your kettle.
After descaling, boil with fresh water
several times and discard. Clean
any descaler off the kettle - it can
damage the parts.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood ZJM300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood ZJM300 in the language / languages: All languages as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood ZJM300

Kenwood ZJM300 User Manual - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info