XD-9581MD (En)
71
Preparation section Basic section Application section Knowledge sections
Adjust the clock before setting the timer.
Timer operation
Timer operation
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the unit is switched off (STANDBY) after one hour. This
timer operates only once directly after setting.
Sleep timer (SLEEP)
The unit is turned OFF (STANDBY) automatically after the specified period has elapsed.
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set
time period.
AI timer playback (PROG.1, PROG.2)
Operate easy To use Timer (O.T.T.)
Timer playback is possible simply by setting the time.
The source selected last before the unit was switched off
(STANDBY) will be played. One hour after start of timer play-
back, the unit will be switched off (STANDBY) automatically.
1 Select the source to be played.
2Press the O.T.T. key.
3Set the ON time.
4Press the ENTER key.
The time is
returned.
The time is
advanced.
÷ Timer playback for a CD is possible only when the CD is set into
the tray No. 1.
÷ When the O.T.T. key is pressed, the input source and the ON
time are displayed.
÷ The ON time can be set in steps of 5 minutes.
÷ In case of combination with another timer, the input source
which has operated last will be played back.
÷ O.T.T. timer setting is possible even when the unit is OFF
(STANDBY).
Press the O.T.T. key twice.
To cancel
ON time display
Sleep timer
Set the number of minutes after which the unit is to be
turned OFF (STANDBY).
1Turn the unit ON.
2Set the time.
Turn the unit OFF (STANDBY) or press the SLEEP key un-
til the sleep time is cancelled.
To cancel
÷ The unit is turned OFF (STANDBY) automatically after the set
time has elapsed.
÷ Each press decreases the time by 10 minutes. The maximum
time that can be set is 90 minutes.
90=80=70...30=20=10=Cancel=90=80...
Duration for sleep timer
Lights
The MD operates on the basis of the information read
from the disk into memory.
Before timer setting with the MD, leave the unit ON for
10 min. or more to make the memory backup function
effective.
A
Note
Note
Each press switches the modes as follows.
1 “O.T.T.” lit........... The timer is used.
2 “O.T.T.” not lit.... The timer is not used.
The volume increases gradually after start of timer playback,
and it stops at the volume preset in the factory.
The program timer does not operate until the end of
operation of the O.T.T. timer.
5Switch OFF (STANDBY) the unit sup-
ply.
ON / STANDBY
ENTER
TUNING
UP
DOWN
O.T.T
SLEEP
